(BBA Approved)SELF ADHESIVE WATERPROOF TANKING MEMBRANE 1m X 15m (15m2) + 5 litre bitumen Primer "DELIVERY TO UK MAINLAND ONLY"

الوصف

Roll BBA Approved to....... Agrément Certificate16/5370 Product Sheet 1,NHBC Standards 2016,CE marking EN 13969 : 2004............waterproofing membrane consists of a self bonding polymer modified bitumen which is covered on one side by a tough two ply cross laminated high density polythene film and protected on the other side by a release sheet which is removed prior to the bonding of the material on to a suitably primed substrate. Once the release sheet has been removed the membrane can be easily applied by roller pressure. NJL self adhesive waterproof tanking membrane is intended for use as a self bonding vertical or horizontal damp proof membrane in tanking ground structures subways and retaining walls. All vertical surfaces should be primed using bitumen membrane primer as follows-------(i) Roll can well before use.---ii) apply at the rate of approximately 7m2/L. Allow to dry for at least 1 hour until touch dry. Keep free from dust.----iii) On very porous surfaces, use two coats of primer. --------------PLEASE FOR YOUR ATTENTION we do not post to the following postcodes,AB 1-9/14/ 21/22/23/30/ 31/32/33/34/ 35/36/37/38/ 39/41/42/43/ 44/45/51/52/ 53/54/55/56 IV - 1 - 56 KW - 1 - 14 KA - 27 - 28 PA - 20 - 39 PH 11 - 40 FK 19 - 21 WITHOUT PREJUDICE IT IS IMPOSSIBLE FINANCIALLY FOR THESE TYPE OF PRODUCTS TO BE DELIVERED TO ANY OFFSHORE ISLANDS THAT ARE INCLUDED AS PART OF UK UNLESS THE BUYER IS PREPARED TO PAY CARRIAGE