RV Backup Camera Wireless Strong Signal: HD 1080P 7'' Touch Key Recording Monitor Rear View System for Trailers/Trucks/5th Wheel 4 Channels Easy Setup Plug and Play for Furrion Pre-Wired Mount R9

Very nice system and good quality. Clear image on monitor, easy to adjust and easy to attach to the vehicle. Installation instructions are clear and the camera was easily installed on my 1978 Lincoln. I feel that this unit was a good value for my needs. Would highly recommend this unit.

I bought this camera about a month ago to replace a Furrion that I was never really happy with and had become so blurry it was unusable. Based on price, I was a little leery at first. How well would a camera that costs less than $100 work? Installation was simple, especially since I had the existing shark fin from my previous camera. I had a couple of questions, and emailed customer service. Their response was quick and helpful. I also requested a windshield mount for the monitor. This will be sent for free, but you have to request it. Based on installation, customer service and testing at home, I gave it 5 stars. Prior to submitting a review, however, I wanted to test it on the road. We just returned from a 2,000 mile trip and I would still give it 5 stars! The camera and monitor (7”!) preformed flawlessly. There was no loss of signal at all, and the picture is crisp. It really helped out backing into sites. The only con is using this with the shark fin. The fin causes the camper to point down more than I’d like, not giving a very distant view. Its great for backing and seeing what is immediately behind the camper, but I’d like just a little bit more distance. I’ll work on a way to adjust the camera angle.

I typically do not write reviews but I always read them and since this product is exactly what I wanted to replace my old Pyle/Swann system I will take the time to write a review. First off the product came to my house on time and was heavy for its size and expertly packed in a heavy duty box. Upon opening I was impressed with the quality of the monitor (much better than any of the Pyle products I have purchased in the past) and the cameras that are housed in a heavy duty aluminum casing. In addition the system comes with a quality set of all the wires, antennas, mounting brackets, and all the mounting screws you would ever need. It also includes an easy to use set of instructions to allow you to get it installed in short order (I was going to post pictures, but several others already have). Finally it should be noted that if you have any questions you can email DohonesBest and they will get back to you in 24 hours (I requested the Free Suction Cup unit and got a response by the end of the night). Now, to talk about the system. The 1st thing I did was hook it on the test bench and everything worked perfectly, you don’t even have to pair the cameras and the Memory Card for the Video Recorder is already installed and ready to record (no formatting needed like others). Next I installed the Video Monitor unit in the truck using a bracket I already had for my old system that slid into the back of the display (display has a standard slot in the back for use with the suction cup-you can also install using either the stand that comes with it or the heavy duty frame bracket that comes pre-installed). After the display is mounted all you have to do is install the antenna (I mounted the stubby antenna on the back of the display, you can also install an extension cable and use the Long Range Antenna included if you need to). Then I connected the 12v Lighter Plug style Power unit to the display and plugged it into the power bank I have in the truck for accessories (the unit has a heavy duty push on switch that works great to control power if your power source is always live). The 1st camera unit was mounted to the rear license plate bracket with a couple screws included (each camera comes with 3 screws per side to LOCK the tilt in position which should then never vibrate loose). Next the Antenna was installed and power was connected to the provided waterproof connector. The 2nd camera was mounted inside the back window of my Travel Trailer and then I installed the stubby antenna and power was connected another light plug I have so I can quickly remove the entire setup when we arrive at camp. When it came time to test the system I was truly impressed with the quality of the display-much better than my old Pyle unit and no more issues with sun glare due to the glare shield included. The cameras are also much better than my old Swann units with way better night vision and I wider field of view. The recording feature works great also and it’s nice to know you have a record of your road trip available it case it is ever needed (fun to watch on your PC). In closing I highly recommend this product, do your research there are lots of units at various price points with lots of reviews. For this unit you will see your get More than what you pay for, the quality is great along with the performance.

UPDATE: After about 8 months of being outside the camera mount on the trailer is rusted and will need some paint or rust neutralizer to fix the rust. The car camera mount suction latch (plastic) broke and made the mount unable to be used due to no ability to suction the device. We taped the remaining stand to a computer mouse pad. This is a much better solution than the original. The mouse pad keeps the monitor from moving, it is not permanently attached to the dash and can be easily removed when not it use much easier than the suction cup option. Also, the monitor can be moved while driving by the passenger allowing them to watch or turned towards the driver or adjusted for both passenger an driver to view. I do not use this as a backup camera. The camera was purchased not for the backup ability, but to use on the highway as a rearview mirror substitute while towing a travel trailer. The bracket that allows for tilting the camera does not allow the camera to be raised high enough to comfortably view traffic. I had to leave one of the adjustment screws out of the bracket to raise it high enough. Cranked it down tight and that seems to work. There is not much vibration here, so I just check it frequently. Plus, if it drops down when I am driving i would know it immediately. The camera works fine and the picture quality is good. I was concerned with lag, but it has very little lag and is most often in near real time. The lines on the screen help with changing lanes. I don't have a Furion pre-wired base, but the installation was fairly easy and straightforward. Like many others, I had to use my power source from the lights at the top of the trailer and that means at least the parking lights of the vehicle must be on for it to work and receive power. Works both day and night. Adjustments and settings are a bit cumbersome at first, but once we learned how to do it, they were much more friendly. The manual for adjustment info was seriously lacking and pretty much worthless. We did it by trial and lots of errors. Overall, for the price, I got what I needed. A safe way to watch the traffic behind me. I have tried to use it a little as a backup camera, but I wouldn't use it without a spotter. I didn't buy it for a backup camera to park our travel trailer and not sure any camera would make me comfortable. The screen size is very nice. I would not want to go smaller. I had to glue the screen shade in place because it kept falling off. The windshield attachment arrangement is Rube Goldberg and a real pain. Couldn't someone make a small weighted stand? Our dashboard surface will not allow suction and I am not going to put screws in anywhere. So that leaves the suction to the windshield option on an SUV where the windshield is about 100 yards down the hood (just kidding) but really a long ways and a pain to reach it to suction this thing. We also put a rubber brace underneath the unit to keep some weight and vibration off the suction arm. Not really a satisfactory solution. I need one of these and this one is priced right and does the job. I could recommend it you based on these expectations.

Highly recommend this product, needed a rear view camera system as travelling down to Spain. Very easy to install with only a power and ground needed to the camera. Connected this to fridge ignition on wiring. The screen just plugs into the cigar lighter connection. Signal is great and picture quality is also good. With an additional SIM you can also record on loop. Got supplied a second free camera, I fitted this under the rear and still the signal is good. Why pay huge money for expensive products when this is simply excellent Thank you

Works well,

This product is one of the best on the market at this price. And the seller would offer you all the support you will need. It is very easy to install by yourself and can be used also in farming or construction sites because the camera is made of good quality to resist the highest level of environmental.

Easy installation. Prepaired with the cameras Lots of mounting and wiring configuration included. Has a very clear image and worked wirelessly with no glitches. Would definitely recommend it. It’s on the back of my 36’ 5th wheel camper.

Been after a reversing camera for a while with a screen .for my Volvo xc90 But didn’t want the hassle of running wires all through the car . Then saw this amazing wireless package :) even tho ment for RVs I saw it and love it from how it’s well packed to what u get and the quality of it is just great . Clear instructions . And so simple to fit . I’ve tested mine as soon as got it with the help of the free testing cable . And worked perfect . Just in middle or mounting my screen to the dash hence the pics . But from the testing the picture quality is so clear and with the 7” screen and split screen u can see it all . So well . So can see back and front same time and allso record allso . Via SD card . All I can say is great things from this and for the price too . and the customer service is so helpful and very prompt . Will upload a video once all installed Adam hodges UK