Will the De Walt batteries 20V Max lithium ion 1.5 ah and charger i have for my drill set work with this

I bought a 20v Max Li-Ion 3.0 Ah battery for this and got about 32 cuts through some 1 x 6 wood planks before it lost charge. You could probably get away with 2 of these 3.0 Ah batteries if one is on the charger at all times.

I have this saw and need to cut a 6ft piece of Caesarstone. Is there a blade that would work with this saw to cut my stone?

It definately will do a good job. 5" mason blade. I wouldn't do it daily if it's your job but a bathroom or 2 is fine. I've done 5 bathroom jobs and work with wood daily. Use fhis little guy a lot from ripping siding to decking to studs. Still works great. I use a bigger corded worm drive for roofs and tearing into sub floor. Also 4 of the bathroom jobs were 1/2" rock and 1 was 1/4". I did probably 30 bathrooms with my 18v. It was a drag when the nicads would run down. Hope that helps.

How do you put the blade on?

The allen wrench is provided in the handle near the battery on the right hand side. Push in the blade lock button at the top of the blade guard to stop the motion. Loosen the bolt with the allen wrench until the clamp is removed. (The bolt is reverse threaded, so it is clockwise to loosen, counterclockwise to tighten, the opposite of most bolts.) Place the blade between the inner and outer washer guards. Pull back the blade guard to insert the blade into place. Use the allen wrench to tighten the bolt into place (using the blade lock button to stop the blade motion). Make sure the blade is securely in place before using.

ASIN	B007NVSTO8
Accessory connection type	5/8" Arbor
Batteries	1 Lithium Ion batteries required.
Batteries Required?	Yes
Batteries included?	No
Best Sellers Rank	541,570 in DIY & Tools ( See Top 100 in DIY & Tools ) 452 in Circular Saws
Blade edge	Sharp
Blade length	6.5 Inches
Certification	(unset)
Colour	Yellow
Customer Reviews	4.6 4.6 out of 5 stars (10,335)
Date First Available	10 Aug. 2012
Finish	Brushed
Handle material	Rubber
Head Style	Flat
Included Components	20v 6-1/2" circular saw
Item Package Quantity	1
Item Weight	3.16 kg
Item model number	DCS391B
Manufacturer	DEWALT
Material	Blend
Measurement System	Metric
Number of Pieces	1
Number of handles	2
Part Number	DCS391B
Pattern	Saw
Power Source	Battery Powered
Product Dimensions	39.37 x 21.59 x 26.67 cm; 3.16 kg
Shape	Rectangular
Size	One Size
Special Features	Keyless Blade Change
Speed	5100 RPM
Style	Circular Saw Only
Voltage	20 Volts

DEWALT 20V MAX Circular Saw, 6-1/2-Inch Blade, 460 MWO Engine, 0-50 Degree Bevel Capability, Bare Tool Only (DCS391B)

التفاصيل

الوصف

المواصفات

المراجعات

الأسئلة الشائعة