Spigen Tempered Glass Screen Protector [GlasTR EZ FIT] designed for Galaxy Z Fold 6 [2 Pack]

Easy to install after looking at it for a minute. To those having issues: 1. Clean the screen with the cleaning wipe 2. Use the cleaning cloth to wipe down the face of the phone 3. Make sure the orange and black pull tab is positioned properly in the alignment tool (it goes under the little tabs at the bottom of the tool) 4. Place the alignment tool over your phone so it almost clicks in place 5. Pull the orange and black pull tab straight back away from the alignment tool, it will see to catch near the end, keep pulling until fully removed 6. Swipe your finger down the center of the tool to stick the screen protector to the phone 7. Unclip the clear plastic tabs at the top and bottom from the alignment tool and remove the alignment tool from your phone 8. Taking the top, or bottom, plastic tab and peel it at an angle across the phone so that it pulls the plastic away that's protecting the top of the screen protector 9. Use the tool that came with the kit to squeeze out any bubbles from the screen protector To those stating there is a 2mm gap between the screen protector and the edge of the glass, yes there is. This is a case compatible screen protector. The entire viewing area of the screen is covered while still allowing a case to position on the phone properly, no matter how thin it is considering how most fold 7 cases work that are out right now which protect the front screen portion of the phone. In my opinion this screen protector is far superior to the Samsung one. It doesn't have an edge that catches my finger while being nice and thick to protect the screen. The face camera works great still as well as responsiveness to touch input. It holds very well to the phone screen without lifting at any edges. Overall considering the cost of the 2 pack, this was a great value. This is the first time I didnt need to use both screen protectors during install and actually have a spare one if this wears out.

Easy install, worked 1st time! No air bubbles and works perfectly with my case! Highly recommend!!

This is the best screen protector for the Z Fold 7. I have autism and I have sensory issues with thick screen protectors that have sharp edges. This screen protector is heaven for my delicate little autistic fingers. It is not sharp at all on the edge. It is very thin and barely noticeable but still protective. You can have basically any case on because of how discreet the screen protector is. Installation was fool proof as well. I tried to order the same screen protector for my iPhone Air and was disappointed that all of Spigens screen protectors are not designed the same because that one was bulky and thick and sharp. This one they make is perfect though. There is no better screen protector for the Z Fold 7.

I installed these on both mine and my son's new phones. It was the EASIEST installation ever. I have a Ringke Fusion clear case on our phones and it doesn't interfere. There is the slightest clearance on the edges. It basically feels the same as the main screen. -Clear instructions -Includes everything you need for cleaning and making sure it's dust-free -The guide makes everything line up perfectly -The cutouts are the perfect size -No bubbles We are both careful about dropping devices, but I have more of a habit of dropping my phones, although I was much more worried about my Flip 7 since it's my first modern flip phone and didn't want a bulky case but still wanted decent protection for the corners and camera lenses. In the past, my phones have used the slim UAG cases + a screen protector and never had issues despite my droppings. I've yet to experience a drop from a normal height with my Flip 7, so I'll update if anything happens to this screen protector. (I've had camera lenses shatter on previous Samsung phones, but that's irrelevant lol)

The great thing about these is that they are very nearly the exact size of the cover screen of the Flip 7, so you can hardly see it at all. I'm always annoyed when the screen protector is smaller and you can see it. All of the materials in the package are high quality, so you feel like the extra cost of these is worth something - even the wet wipe is better than in other screen protectors I've purchased. The installation process was easy and straightforward. However, there is a pretty big bubble around one of the lenses and between the lenses. The squeegee is difficult to fit in between the lenses, so I've also been trying with a credit card, but I can't get it out. It's not noticeable enough to waste it and use the second protector in the package. The glass feels great and no different than the original screen.

The alignment tool provided with these screen protectors made this the easiest screen protector install I've ever done, and thats even with the holes cut out for the cameras. Im also very impressed with how precisely it fits the device, the glass fits so snugly that it doesn't leave any room around the cameras.

This is the perfect screen protector for the z flip7! I love that it has the exact cutout for both camera lenses rather than just one oval around both cameras it feels more secure and looks better in my opinion! It comes with two in case you mess up the first application although that’d be hard to do given that it comes with a very easy application setup or if you just need or want to replace the protector down the line. Overall great value for money and definitely recommend!!

I enjoy these screen protectors that come with an install tool. Makes it easy. + Aligned properly with no air bubbles. + Got it right the first time. - Fingerprints smudge easily. - Made smaller to fit the Spigen cases, but leaves room for dust to collect between the case edge and the protector edge.

This is very good screen protector for the Galaxy Z Fold 7 with the Spigen Fold 7 case (Slim). This is very easy to clean the screen. Thank you for the company.

Qualità eccelsa ed applicazione davvero facile e veloce, 5 stelle meritatissime per la versione Z Fold 6!

صراحة الفترة الأخيرة ذي شركتي المفضله بواقيات الشاشه انصح به خامه وسهل التركيب

So easy to position and fits perfectly! Love it. Great value for the money

普段、スマートフォンのフィルム貼りは家電量販店のサービスを利用するほど手先が不器用な私ですが、今回は思い切ってSpigenのガラスフィルムを自分で貼ってみることにしました。結果から言うと、気泡ひとつ残すことなく、驚くほど綺麗に貼り付けることができ、感動しています！ 【貼り付け】 まず驚いたのは、貼り付けガイド枠が付属している点です。これがあるおかげで、位置合わせが非常に簡単で、ズレる心配がありませんでした。説明書も分かりやすく、指示通りに進めるだけで、あっという間に完了。今まで苦労していたのが嘘のようです。 【フィルム】 肝心のフィルムの品質も文句なしです。透明度が高く、画面が非常にクリアに見えます。指紋もつきにくく、操作性も滑らか。万が一の落下時にも画面をしっかりと保護してくれるであろう安心感があります。サイズが小さいという声もありますが、ディスプレイの表示領域と一致しているため、視覚的に気になることはありません。また、ディスプレイ全面をフィルムで覆ってしまうと、ケースと干渉する恐れもあるため、このサイズ感は絶妙だと感じています。 【総評】 不器用だからと諦めていた方にこそ、ぜひ試していただきたい逸品です。これからは自分で安心してフィルム交換ができそうです。Spigenさん、素晴らしい商品をありがとうございます！