Plus RGBW PM | WiFi Smart Remote Control for RGBW Led Strips with Power Metering | Home Automation | Bluetooth Gateway | No Hub | Compatible with Alexa & Google Home | iOS Android App

Why did I buy it on Amazon USA? Because Canadian Amazon often looks like a refrigerator. It should have everything, but when you open it, it's empty. Thank you for the opportunity to buy this.

I have installed a couple of the Shelly RGBW PM modules, and they have been working without issues. I have 8 Shelly devices in my Smart Home. They have been installed for a couple of years and I have no regrets.

Shelly ecosystem is pretty strong for IOT, in my limited option. This device was excellent for turning a Low Voltage dumb Light Switch into a Homekit enabled endpoint. See attached photo for setup with: - Input: (1) 24V DC power via positive (red) and negative (white) - Output: (3) 24V LED strips - Switch: Single Pole, Leviton/Brand doesn't matter - Smart controller: Shelly Plus RGBW PM Setting the device profile to "Lights x4" and Input 1 (I1) to Toggle the smart controls work as well as physical switch going "ON". Setting Input 1 to Edge mode acts like a pure toggle -- physical switch goes between on/off regardless of position. Homekit firmware is available on Github, flashing it is pretty easy. Reverting was easily done via web interface. Shelly native app is quite excellent and highlights just how much you can do with the Shelly devices (scripts, automations, toggles, IOT galore). Felt like a well produced product.

Great 4-channel controller. I have a few of these. Some in RGBW mode and others in 4x white mode. High Shelly quality as usual. I control my RGBW strips mostly by MQTT since Home Assistant doesn't support RGB+W well. Stick with RGB (no separate white channel) LEDs if compatibility with Home Assistant is important. Or learn MQTT to get full control. I love how this controller has a high frequency mode for really smooth dimming and transitions. Shelly support and community are really great for learning.

Utilizing these in my van mostly as dimmers since the one plus don’t dim. I only have them in white mode but they work as advertised. Only challenge I have had is the external physical switch capability seems to not work for me with a 12v setup

Most RGBW controllers use the ESP8266, but it only has software PWM, which inherently flickers and can't get to high enough frequencies to prevent visible pulsing and camera artifacts. These modules solve that by using ESP32 chips instead, which bestows high speed hardware PWM on all of the outputs. The stock firmware is surprisingly functional, with the main missing feature for me being no support for 2xCCT. If you're crafty enough, you can flash the module with ESPhome or Tasmota, but as of Nov 2024, it's very difficult to do OTA, so you'll have to figure out a way to connect to the non-standard programming pins on the bottom of the unit.

Leve Shelly items! Controlling 4 zones of LEDs in my kitchen

Why did you pick this product vs others?: Shelly products are easy to setup and add to Home Assistant.

Es muy fácil de utilizar y permite manejar tiras leds RGB a 12v o 24.

Der Shelly Plus RGBW PM WLAN LED Controller mit Leistungsmessung kann vier LED Strips unabhängig Schalten und Dimmen. Zusätzlich können noch Taster angeschlossen werden. Dann benötigt man zum Dimmen keine App. Die Einrichtung mit der Shelly App klappte sofort und ist selbsterklärend. Er kann mit oder ohne Cloud, also auch rein lokal im eigenen WLAN, verwendet werden. Ein klarer Pluspunkt. Ich verwende ihn mit Home Assistant mit einem normalen Lichttaster und einem Shelly BluMotion Bewegungsmelder bisher ohne Probleme.

Très bon produit, parfait pour gérer les rubans leds RGBW

Brilliant switch. Nice compact size,easy to install and connect to my network.

La unidad funciona arrastrando el bajo, lo que funciona para proyectos que no son de barco, pero requiere relés para funcionar en un barco. También resulta difícil de integrar en mi configuración de Shelly.