Robostore India ELM black 327 2.1v OBD2 scanner car diagnostic tool for 2010+ cars with Warranty , (Not support 7 seater)

I had purchased it on 1 April for My Mahindra XUV500 W8 2012 ModelIts working like charm.Realtime information is correct.You can view it realtime info on torque app which is provided by the sellerand if an engine check lite is come you can view the fault on the same appeven you can temporarily clear that fault from the ecu.its works fine for.defenately try this product if you have port for EBD IIthanks for such a great product.

Good product

No external or water damage yet stopped working within 1 month of use. Lights come on but device is not visible in Bluetooth on any phone.

when i ordered this i expected a genuine elm327 scanner but but i had a doubt so i checked to see if it could read the VIN number of both my cars and it did not,which ment its a clone, also it would get very warm when i used it for 5 minsthe clone elm327 modules dont use the original chip and firmware and hence fail to retrieve and process the long VIN string from the ecu, so to confirm my doubt i took apart the device and saw that this device is half empty, the pcb only uses half the space inside and its not using the proper soldered chip instead the chip is under a blob of epoxy like the chips in the small Chinese children's toys,the fake/clone ones are sold for 300rs and less on ebay.in and preform the same as this one.

It works superb with my Toyota Etios 2013 and Skoda Octavia 2006, Supports all OBD protocols, helped me save money or else have to pay 1400 to Toyota showroom just for scanning, it's truly a life saver, a must buy product, worth each penny, shows fault codes, realtime information, RPM, Throttle, Fuel Pressure etc depending on what sensors installed in your car..

I ordered this product and returned it.I checked with the seller if this works for FIAT PALIO 1.3 MJD 2010 Model; and they said YES.But when i got the product, it did not work. The Connector is not able to communicate to the ECU, i am only able to connect the connector to the bluetooth. Which means, the connector is not able to recognise the protocol used in FIAT ECU.So, if anyone is planning to buy, better to check with anyone who has an OBD connector and confirm if its working and then place an order.

I ordered this for my car to clear engine codes but later I found that this OBD device clears only engine codes no other codes like airbag, abs, tpms etc. But it removed engine codes very well, and works on all cars even audi bmw. Mercedes as well

Works fine with Punto Evo MJD1.3 2015. OBD2 port is located right beside bonnet release hatch. Bluetooth disconnected some 2/3 times during a 1hr drive. PIN being hardcoded is a concern. Torque Pro is decent, though better app will be more helpful.Pair it up with an HUD and get a better driving experience with live stats on the screen and not having to look down.