DC Sports EX-1012B Performance Bolt-On Resonated Muffler Slant Tip with Clamps and Adapters for Fitment on Most Cars, Sedans, and Trucks - Matte Black Powdercoat

I can confirm this will fit a 2025 Subaru Forester Premium trim with no modification to the tailpipe but some inventive installation solutions. The tail pipe on my forester flares out at the end so this will not slip on with the hardware already attached. So I had to hot glue 2 of the flat bolts in place and slide the last bolt in place once I slide this past the flared out edge. Then i was able to thread all the bolts in by rotating the pipe to get to all of them. Centered it and tightened down the bolts. I did not push this all the way back as the mounting hardware would come into contact with the muffler and probably cause a rattle down the line. This will result in this sticking out past the bumper a little from certain angles. Looks a lot better then stock to me.

My wife saw this on a Forester forum and thought it looked better than the very small, recessed, chrome trim on her 2025 Forester Touring. That is the top trim level in the US, I know other countries have different names for the various trim levels. The OEM trim ring Touring tailpipe is held in place by a welded bracket on the short pipe exiting the muffler at the rear of the car. Along with the bracket, the very end of the pipe swells out to a larger diameter to match the inside of the chrome trim piece. The larger diameter doesn't allow the new tip to slide on without removing all the hardware. The welded bracket doesn't allow the tip to slide all the way onto the pipe. Believe me, I know how this sounds as I type it. Cut the bracket off, slid the tip past the larger section and reassembled the hardware. Clamped it down and it looks very nice. Hope the black coating lasts.

Pretty good. Just hope they don’t fall off on the highway. lol.

These things are really nice ads to my thrush muffler system

I bought this for my 2020 Toyota RAV4 and it fits perfectly. The installation was super easy since it’s a bolt-on. It looks great and gives the car a nice upgrade. Highly recommended!

Fits a tad bit tight for 2008-2012 Honda accord You only need one adjustment screw so make sure it’s super tight. If you try to use all three. It’ll not fit Looks much cooler than oem, oem is some weird oval shape I prefer this. It sticks out a little too much but it’s fine

I don't think this makes a drastic difference on the exhaust note, but it does modify it slightly. I think it smooth out the tone a bit. My only complaint is that over time, the outside will just sorta look dirty all the time and the inside seems to corrode as well. However, they're not super expensive, so you could replace them once a year and it not be a big deal.

The DC sport exhaust tip looks great and has a good quality build. I have a 2015 Toyota Tacoma, the end of the exhaust tip was larger so I cut just behind it and remove so the DC exhaust would slide on. (note: I bought two DC tips-larger inlet diameter 2.87 which will fit without cutting BUT sticks out too much-smaller inlet 2.25, cut your tip of original exhaust and slide on to look just right. So I used GEARWRENCH Exhaust and Tailpipe Cutter - 2031DD (amazon item), WD40 to lubricate where the cutting wheels are, I remove mud flaps (optional) but it gave me more room to cut. Be patient when cutting and apply WD40 to make smooth, a few up and down motions and I had a clean cut. Use a dremel drill to beval and smooth out edges after cutting. I wasn't able to use all the hardware to secure tip, but I was able to use one which worked out perfectly. The install took about 45mins and wasn't that complicated. I'm not a professional nor a weekend mechanic just a DIYer on projects I think I can handle. This is what worked for me and this DC Sport Exhaust tip is a solid product.

I thought this tip was huge when i first received it. It is.. but it still looks good. the overall outlet diameter is pretty large but nothing to complain about. Fits to my 2” (actually 1.5”) exhaust pipe and i do actually believe it roars the sound a bit in a good way (if u have a good exhaust system) as it has some sort of “chamber“ on the inside. Good quality product for a exhaust tip. Came through right away and happy with how it looks. Had to get used to going from small pipe to this big tip on the end though. I will try to add a picture in here soon of mine.

Exlente producto me encantó lo recomiendo 100 %

Excelente qualidade, fiquei surpreso com a robustez e recebimento rápido e perfeito, só errei pensando que eram dois, estou comprando outro . Brazil São paulo

Waste of money...there is no sound change.

Looks durable, stainless steel perfect fit for my montero sports. Looks nice and the silver goes well with the chrome touch with the car. Overall i am satisfied with my purchase. Great price too.