DC Sports EX-1013 Performance Bolt-On Resonated Muffler Slant Exhaust Tip with Clamps and Adapters for Universal Fitment on Most Cars, Sedans, and Trucks - Polished Stainless Steel

I had to buy 2 for an 08 Honda Pilot. These tips are nice, and seem sturdy. The exhaust pipes on the 08 Pilot are pretty close together, so getting both tips on involved only being able to tighten 2 out of 3 bolts on each one (I noticed from other reviews, for other reasons some people had to do the same thing). I also had to align them so that each one was on straight. Because both pipes are so close, it causes the end of one pipe to hit the inside of the chrome tip. Now, the exhaust pipe is not obstructed. But, I was not able to slide them both all the back to the muffler. One can go all the way back, and one can’t. So, I pulled them out a bit, evened them up, and tightened the bolts. They are on pretty snug, and (as you can see in my pictures, they don’t stick out at all past the bumper. I will keep an eye on the bolts, but I tightened them pretty good. I did not notice a difference in sound, but, I wasn’t really going for that. I was just trying to spruce up the looks of an older vehicle. I don’t even think my pictures do them justice. I love the look, and would recommend them to someone trying to “pretty” up their vehicle.

Bought this for my 1998 Mazda B3000 Pickup truck with cat back Flowmaster super 40. I wanted to buy this before I bought a weld on tip to see if it actually made a difference in sound. I was pleasantly surprised when it made the tone a deeper sound, not a whole lot, just enough to make it sound proper if that makes sense. When it comes to Vehicles of all walks of life, your exhaust is a key part of your vehicles personality, this product helps take the annoying sounds of your after market exhaust and make it sound alot more proper. Long story short, Bolts on Easy, Makes a small difference in sound to your exhaust but enough to make a difference. If you can hide the 10mm bolts that clamp it on it would look really clean. I'd suggest you buy a weld on tip if your going hard core so you can get the most out of your exhausts tips potential for sound. But, if your dont know how to weld, dont have the money to take it to get welded, or simply just want an easy car modification to improve your exhaust sound this is the product for you. And one last thing, Make sure your realize the dimensions of this tip, you dont want a bolt on tip that the same diameter of your exhausts or else it wont slip over. Triple check before you buy. I'm speaking from experience.

This product is incredibly easy to install, as long as you’re capable of adjusting screws and tightening them down upon placement over your tail pipe. It LOOKS great! It fits amazing and tightens down with no wiggle, rattle or shakiness. Doesn’t look or feel Nearly as inexpensive as its price. However, I bought this more for the sound than the look, as I just wanted a throatier sound out of my exhaust without spending hundreds on a new exhaust or at least muffler. So far, I’ve only driven around the block and on a Main Street in town at about 30mph max and honestly can’t hear any difference in the sound. I’ve yet to take it on the highway, so I may just need to hear it at higher speeds and RPMs. Otherwise, aesthetically, this is an awesome buy to spruce up the look of any ride. If your buying for sound, I would research others who have put this product on your particular vehicle. Mine is an 04 4.7 V8 Dodge Durango. I would definitely recommend to buy for looks!

Okay, these are cool as heck. My car comes stock with bare pipes even on higher trims, for some reason and these tips fixed that, improving the rear look drastically. Definitely bigger than I thought, yet not as big as a rice can, which is good! They also protrude quite a bit on my 2013 Impala, but it is exactly the look I was going for. If you want them deeper, it is possible to push them further in, although that might require cutting stuff depending on your car. I recently put a pair of Flowmaster mufflers on my car and these tips compliment the new throaty rumble, giving it a very muscular look that goes with it. Installing these took less than 10 minutes, although I recommend spending a few minutes properly aligning and securing the bolts. NOTE: These WILL NOT alter your sound. They are only a cosmetic part. This is common logic, but just in case you expect to get a nice sound out of these, this is not the right part. I tried them on when my exhaust was stock and as expected, there is no difference. Only a very slight "windy" echo if you put your ear literally next to the exhaust.

Easy install. Feels like a quality part, good weight to it and the finish is nice. Installed on 2025 Subaru Forester. Stock muffler ended around 5" before the bumper, just something that annoyed me. This finished it nicely

I had these on a 2006 C6 Corvette base and they were beautiful!!! It did have long tube headers and high flow cats. Unfortunately within months the tips started to lose their beautiful polish and turn brown with the heat of the exhaust. Even if I had the car stock, it really wouldn't matter. Exhaust tips get very hot after a drive to the grocery store. I had to Plasti dip them black and problem solved.

Been doing upgrades on my 03 tundra V8 and pulling the magnaflow muffler and resonator only leaving the cat. Very nice sound BUT that cold start shotgun blast was a bit much… this little baby fixed that and gave it an even more throaty sound. Very pleased

Muy bonito

Perfectly fit to my Mazda 3 2012.

جيد يصدا بعد فترة

Al SUV que se le instalo, luce mucho mejor, mas deportivo!

Good looking, well built, easy to install. Should be easy to take off for the winter. Great sound when you put your foot into it on my wife's little Turbo Juke.

It looks great on my car