Can this dim incandescent and LED bulbs on the same circuit?

Yes- the issue is that the bulbs are very different and as a result will not dim uniformly so when dimmed one may be brighter

Can i use 2 of these to dim from either location on a 3way (currently an old skylark and an on/off switch)? or do i need a maestro setup?

On 3-way circuits, only one ELECTRO-MECHANICAL switch can be a dimmer regardless of lamp type, other switch must be standard single-pole 3-way on/off. You CAN use DIGITAL ELECTRONIC CONTROL SYSTEM (ie: MAESTRO) for all switches on circuit. Skylark SCL-153P dimmer is "electronic" but it is not a CONTROL SYSTEM that encompasses the whole circuit.

So I have two can light led’s wired to a 2 toggle switch plate, can I remove the light receptacle and replace with this to dim the lights?

As long as the LEDs you are using are compatible with this dimmer, then yes it will work properly for your application. For more information on compatible LED lamps, Lutron would reccomed checking out their LED tool at Lutron.com/ledfinder.

How do I wire this with no ground?

Note 4 of the installation instructions states: When no "grounding means" exist in wallbox, the 2011 NEC allows a control to be installed as a replacement if 1) a nonmetallic ,noncombustible faceplate is used with nonmetallic attachment screws or 2) the circuit is protected by a GFCI. When installing a control according to these methods, cap or remove green wire before screwing control into wallbox.

Operation Mode	ON-DIM-OFF
Operating Voltage	120 Volts
Contact Type	Normally Open
Connector Type	Screw Terminals
Brand	Lutron
Terminal	Scl-153p-wh
Item dimensions L x W x H	0.3 x 2.94 x 4.69 inches
Circuit Type	1-way
Actuator Type	Push Button
Contact Material	Brass
International Protection Rating	IP00
Number of Positions	2
Lower Temperature Rating	32 Degrees Fahrenheit
Upper Temperature Rating	104 Degrees Fahrenheit
Controller Type	Push Button, Mechanical knob
Control Method	Touch
Connectivity Protocol	X-10
Color	White
Wattage	150
Unit Count	1.0 Count
Number of Items	1
Global Trade Identification Number	00784276008938
Manufacturer	Lutron Electronics Company, Inc.
UPC	784276008938
Part Number	SCL-153P-WH
Item Weight	3.2 ounces
Product Dimensions	0.3 x 2.94 x 4.69 inches
Item model number	SCL-153P-WH
Is Discontinued By Manufacturer	No
Style	Dimmer
Finish	White
Pattern	Switch
Shape	Rectangular
Voltage	120 Volts
Item Package Quantity	1
Number Of Pieces	1
Type of Bulb	Compact Fluorescent,Halogen,Incandescent,LED
Included Components	(1) Skylark LED+ dimmer switch
Batteries Included?	No
Batteries Required?	No

Sponsored Ad - Lutron Skylark LED+ Dimmer Switch for Dimmable LED, Halogen and Incandescent Bulbs | 150W/Single-Pole or 3-Way | SCL-153P-WH | White

التفاصيل

الوصف

المواصفات

لديك سؤال؟ انظر ماذا طلب الآخرون

الأسئلة الشائعة