Termitor 9005/HB3 H11/H8/H9 LED Bulbs Combo, 150,000LM insane Brightness, Real 1:1 Mini Size, 6500K White, 70,000Hrs Long Service Life with cooling Fans, Plug N Play, Pack of 4

I bought the 9005 33,000 lumen Termitor (Latest Upgrade) headlight bulbs. Amazon isn't smart enough to realize that just because a headlight only uses one bulb that doesn't mean that it uses a dual beam bulb, so they constantly tried to direct me to 9012 (dual beam) headlight bulbs. Fix your software Amazon! My 2017 Ford Taurus Limited uses the 9005 (high beam bulbs in projector headlights. A shutter blocks some of the light from the top of the beam for low beams and the shutter gets out of the way for high beams. These bulbs are perfect for this application. I'm not sure they'd work on reflector headlights, but I'm no expert. I ordered the bulbs on Tuesday and they arrived today (Thursday). I immediately installed them. It took about 10 minutes and on my car you have to remove the air filter housing and hose to get to the driver side bulb. The installation was a breeze. The tabs on these bulbs aren't as big or keyed like the halogen with one tab bigger than the rest. This allows you to line them up to get the best pattern, but they still fit good and tight. I tried to get as close to 3 and 9 with the LED's. I waited until it was dark and took my car out for a test drive. I spent about 30 minutes in high traffic areas, wanting to see if I was going to get anyone flashing at me because my lights were too bright. It didn't happen a single time. I also watched where my lights hit on other cars in various situations and not once did my lights hit their rear window, side mirrors or rear view mirror. They passed the in traffic test, so I headed out to the country. I was driving on a very dark, winding country road doing about 50-55 and my low beams were more than enough to light the way. When I tested the high beams they were exceptional. I even put my lights on auto high beams and they worked perfectly when approaching oncoming traffic occasionally. So, I've only had these headlight bulbs for a few hours, but they have passed every test I have given them. They worked well in traffic and on dark country roads. They didn't bring up any warnings on my Ford Taurus dashboard, they do not flicker and they did not cause static on the radio. These were all concerns when I bought these bulbs and I'm glad that none of those things happened. Plus, I love the bright white of the LED over the dingy yellow of the halogen. My car looks so much better now that my headlights are as white as my fog lights. I would highly recommend these bulbs for anyone with single beam projector headlights with shutters. They are bright, but not ridiculously bright and the beam pattern for me was exactly like the pictures on their Amazon page and the shutters cut off the light to make sure that you aren't blinding anyone. I was concerned that they might be too bright, but I honestly wouldn't want them to be any dimmer. After listening to Amazon and buying 9012 bulbs that didn't fit and going back and forth between trying to decide whether to get halogen or LED, I'm very glad I got these LED bulbs. They are perfect for my car.

Car that I drive is a 2008 Mazda 3 4Dr Sedan Automatic i Touring. Got so tired and fed up with felt like spending money every month or so on halogen bulbs. It was always the same old story, trip to auto zone to avoid a fix it ticket. I almost tried to buy the Sylvania brand on Amazon for cheaper but what's the use? Its STILL the SAME product. I'm done with those and never going back. The new Territory Has snapped right in without any special add on adapters, just plug and play deal. Way brighter and super easy. Love them. Can see way better at night and not have to worry about them burning out so quickly anymore. More than I can say about the Sylvania brand "Made in Germany". They're slippin

Fit like a glove, smooth plug and play! It is so much brighter then oem headlight bulbs now I have confidence driving in the night time and seeing everything clearly!

So far absolutely no issues and am very impressed! Super easy to install true plug and play bulb, was a total of 10min start to finish! Don't recall having instructions but it was pretty self explanatory, and bulb identifies which size needs to be installed facing up. VISIBILITY on LOW & HIGH beams are 80% greater forward as well as outwards to the sides! Beam pattern is perfect hight, clear bright light! Was worried might be to bright actually and would be an issue for opposing traffic but ao far I think maby 2 other drivers have mistaken my lows for highs. 10/10 would recommend

Purchased these after a not so good experience with another vendor. The OEM style bulbs weren't illuminating the road like my other more modern vehicles so I opted to upgrade the lights to LED units. Had hopes that the "blinking" light syndrome wouldn't bite me for compatibility with a 2007 Dodge Ram 1500, but it did. High beams worked fine, but on low beam, the lights just blinked several times and then went out with just the running/parking amber lights illuminated. Knowing this may be an issue with the ECU seeing the bulbs as 'out', as the LED's pull far less voltage than the halogens, I contacted the vendor for a "decoder" as the listing described. I got a cordial email response back in less than 12 hours, and got instructions to purchase https://www.amazon.com/dp/B01CTIDC64?ref=ppx_yo2ov_dt_b_fed_asin_title with the promise of a refund of the cost. Skeptical, I proceeded, and the decoder solved the problem of the low voltage detection. (The decoders are merely high watt resistors that pull voltage and dissipate it as heat, so the ECU thinks the proper light draw is on.) I let the resistors dangle in the open space of the engine compartment behind the lights, as they build up enough heat to melt plastic on contact. Unfortunately the decoder snap fittings to lock in the OEM light plug aren't accurate to let the OEM locking tab function, so a bit of electrical tape was needed to secure the connection together. Contacted the vendor again as requested, and they promptly took care of my additional cost of the decoder as refund to the original purchase. The lights are bright, work as expected and are a welcomed upgrade to our property work truck. Fitting the new bulbs into the headlight socket is challenging as they are made to be directional...three tabs have to be installed in the right receiver as each tab is a different size, so be careful when beginning your twist to ensure you've got the bulb seated properly. Also, make sure the old gasket from your old bulb is removed as they have a tendency to stick in the housing and you'll never get the new bulb in. I haven't had any issues with the noise others notice from the fans on these type of bulbs, but average temps have been in the 30's so perhaps that may be a summertime thing, as I doubt there's much excess heat being produced in these temps. As an Amazon customer for years, it's refreshing to have a vendor keep their word and follow through on customer support without a hitch. Purchasing from this vendor was a smooth and reliable process.

Excelente producto. Muy recomendable, superó las expectativas y a un buen precio.