VEVOR 10L Sonic Cleaner with Heater Timer & Basket, Professional Digital Sonic Cavitation Machine, 240W Cleaning Machine for Lab Tools, Metal Parts, Carburetor, Brass, Auto Parts, Engine Parts

I purchased this sonic cleaner because it offered the size and features that were important to me. I especially like that it has solid knobs to control the temperature and time. Many ultra-sonic cleaners will only heat to 80 or 90 degrees, this one heats to 110 deg. I also felt that the price was good. It seems that I always have projects around the house or for freinds. I plan on using the cleaner for things like rebuilding the caburators from lawn mowers or power washers that so often I am asked to fix. I have only had this for a short time. I have not tried to clean any jewelry but have used it to degrease an coip[le of items, which worked well. I just finished cleaning the spray head from my kitchen sink and my shower head with the flexable metal hose. They both had crusted build up and clogged spray holes. The sonic cleaner did a very good job at removing and loosening the crusted calcium build up on both. For me this size works very well as it gives me the ability to clean larger items. This size also provides a drain with shut-off valve eleiminating the need to carry it to remove the dirty contents. I have cleaned a couple of small items and put them in a plastic baggy with a solution mixture the cleans them best. This way I do not contaminate or need replace the all of the solution. I am very pleased with this purchase as I am sure there will be many discovered uses having this in my garage.

Works great, cleans a lot better than I thought it would. I noticed a lot of reviews commenting on it takes too long to heat up, but I didn’t think it took that long . Indoors, added all cold water and turned temp to max , took about an hour to reach temperature. Not bad if you ask me. I also noticed a lot of reviews commenting on the noise, it’s not necessarily that loud but it puts out a frying sound that has a certain pitch to it that sounds like nails on a chalkboard! So while it is tolerable, I definitely wouldn’t want to be around it all day, I just put it far away from me or put it in a different room. Good product though and good price

Bought this as a jewelry cleaner for all my wifes bracelets, rings, necklaces, & trinkets. It works amazingly well. I just add a little ammonia, and a drop of dish soap and it makes her jewelry look brand-spankin-new. It's also handy for thoroughly cleaning household items like Keurig reusable cups. The cleaning power shocked me beyond my expectations. The build quality and durability can't be surpassed.

The volume is two liters, not three. Three would overflow; two is already a bit above the fill crease. It's not like they meant the overall dimensions which are greater than that; they just lied about the tank size. But for the $50 price, as long as you know what you're getting, I can still recommend it. Apparently a lot of people didn't notice the volume discrepancy after all. The device works well so far; I like the dial controls rather than digital buttons for convenience and hopefully longevity. You can't get an exact temperature indication without your own thermometer, but it does indicate whether the heater is on or off so it's not hard to tell whether it has come to temperature or to adjust the thermostat to figure out roughly what temperature it's at. The on-switch-timer does have a ding but I couldn't easily hear it over the noise of the device; better just wait until you don't hear the device instead. I measured the power consumption with something similar to a killa-watt device. The power factor is ideal, and the consumption when using just the ultrasonic is exactly 120W. The heater appears to be PTC-based by the behavior, so it can consume more or less than 150W or whatever they rated it at. I'm not sure what the maximum temperature it will actually reach is; maybe 60 or 70 celsius judging by the instructions, but probably more. That recommendation may be more for prolonging the electronic lifetime, since it's not going to cool itself that well. I wouldn't go past that, for that reason and because it doesn't have to be that hot to clean well. I don't know yet how long it will last; this sort of device does need to be treated with respect because it's driving those ultrasonic transducers with 60 watts each, and with two of them I could imagine problems if they don't stay in sync and try to oppose each other. I didn't verify the kHz, but I can say it makes an awful racket akin to a quieter version of the squeal of a circular saw, and you should definitely use hearing protection or stay out of the room after you start it up, because you're not supposed to be able to hear ultrasound so you've got to figure it's pretty intense.

This has worked great for me. Out of the blue, it died. I thought the whole thing was a goner, but it turns out there is a easily replaceable fuse near the plug/switch. Came right back to life. As an engineer, I very much appreciate this fused interface for saving the electronics. Still use it several times per week on watch parts. It does the trick! As with all ultrasonic cleaners, this one is loud. I put foam between the lid and the bath and that greatly deadens the sound.

Works great. Heat really helps to deep clean the gun parts I needed done. Was want I wanted.

Not good for cleaning parts for any kind of stuff except for maybe medical steel or maybe jewelry. Unfortunately my window is closed to return so off to the marketplace. Kinda noisy but it didn't bother me BUT the heat was consistent and worked really well

I am thoroughly impressed with the heat and cleaning ability of this VEVOR 15L unit. I’ve already cleaned six carburetors with it, and it reaches into every tight passage, leaving them spotless. Usually, just one 10-minute cycle does the trick! It’s a powerful tool that makes carburetor maintenance effortless. I’m not sure how it compares to high-end professional models, but for my shop, it’s a total 'wow' factor. If you're looking for an efficient ultrasonic cleaner for small engine parts, this one is it!

Nog niet gebruikt, maar ziet er goed uit. Goed afgewerkt. Toch verrast door de kleine inhoud. Mijn bril past er alleen diagonaal in, terwijl de inhoud 2 liter is.

Wait to much after delay and alos not working

Acheté à deux reprises, et renvoyé deux fois également : la première pour un problème d’ultrason, la seconde pour un défaut du minuteur. Peut-être un manque de chance…

works prima

Ottimo prodotto Consigliato al 100% Un po' piccola per le pulizie di pezzi meccanici ingombranti es corpi farfallati ma perfetta per iniettori e altra minuteria meccanica. Fa' perfettamente il suo lavoro