FanzKo GX390 Ignition Key Switch Box w/Keys Engine Stop On Switch for Honda GX340 GX390 11hp 13hp Gas Engine

This was exactly what I needed, and it was easy to replace the old one.

The ignition switch wire with the eyelet is the power wire that connects to the starter solenoid B+ terminal. (B+ is the same post that the battery positive cable connects to at the starter solenoid)The wire with the female spade terminal is the starter signal wire that slides over the male blade located on the starter solenoid.The two black wires are used for ignition off. You will want one of the two black wires to connect to the Ignition Switches Red wire. the other black wire to connect to the Magneto wire.Does not matter which black wire connects to the red wire. Just so you have one black wire to the red and the other black wire to the magneto.I did not use the separate kill switch that they provided with the assembly. It is not needed, the two black wires are what shuts the engine off when the ignition key is rotated to the off position.

EASY INSTALL , GOOD PRDUCT

Unfortunately this was a bad product. I inserted the key to turn the ignition key and the interior key switch fell apart. Notice on the photo where the key goes its black...the key ignition fell completely apart and now the whole thing is useless. I requested a return and it’s pending approval. This was a cheap box made with the cheapest materials available on the market.

It’s whats i was looking for great product.

Built cheep, huge key hole, should fill with water nice when not in use.... But it's cheep and it worked once I figured out the wiring with no directions...

Couldn't figure out the wires so I just started connecting random ones and cranking it till it worked.Fits perfect and is exactly what you need for your 420cc Predator

Good

exactement ce que j'avais besoin