Premium Adhesive Copper Foil Tape - Double-Sided Conductive - 0.5 inch (12.7 mm) - EMI and RF Shielding, Paper Circuits, Electrical Repairs, Grounding, Arts and Crafts, Home Interior

Using this to make DIY capacitive touch pads for an ESP32/Arduino project (see photos showing wire soldered to a rectangular copper pad made from this tape and an adhesive copper pad stuck directly to the inside of a polycarbonate enclosure). Solders easily with standard multicore lead solder and the solder heat (using here 305 deg C) does not distort the copper or bubble the adhesive on the back with short periods of soldering - the heat quickly spreads evenly throughout the thermally conductive copper rather than melting the adhesive directly below. Works really well for soldering to and solder flows nicely on the copper surface. Adhesive on the back is strong and will reliably stick to polycarbonate project enclosure box sides without lifting or curling at the edges. Polycarbonate has a reasonably high surface energy and I would expect the tape to stick well to similarly high energy surfaces. An ideal low cost tape for RF shielding on projects or for making things like capacitive contact pads. Not too thin and holds its shape when you come to stick it to something. It may crease slightly when removed from the backing, particularly if mishandled, but is easily smoothed out when applying to get it looking flat again. Tests with continuity meter confirm the adhesive is conductive, I measured about half an ohm from front through to the adhesive back so you could layer and overlap multiple strips of tape inside an enclosure to provide shielding to all sides. Recommended.

Soo much better than using slug pellets. It's still on the planters outside and working well from last year. I put tape near the bottom of the pot (to save tape) but if you are feeling vindictive put it at the top. 🙃 I also cut the bottom out of the plastic pots that young plant were in, put tape around the top and planted them in the garden.

Very good product. Easy to apply and also to perl if needed. Conductivity very good. Used it for various repairs in desktop PCs, laptops and some creative electrical works. Highly recommended!

A thin, very pliable (so you can get it in to nooks and crannies) self adhesive copper tape. My application was for making up some fully shielded dummy USB 3 plugs to stop some unused USB ports causing interference to a neighbouring 2.4GHz WiFi access point. Apparently it also repels snails although since they rarely bother trying to eat my access point I cannot vouch for this.

The quality of this tape was good, the thickness perfect but, sadly, it didn't stick at all points - found it lifting from areas. To be fair, I was using it on irregular shaped seaglass so possibly not the right tape for my projects. Still have plenty left so yet to find something to use it on...maybe I'll have better luck next time!

This tape works well for shielding guitar cavities. Easy to cut to shape and the backing paper peels off easily. The copper tape without the backing has a tendency to roll up and stick to itself so it takes a bit of practice. Sticks to surfaces really well - smoother surfaces best, but will stick to the rougher wood too. Also stick to pick guards well. Overlapping the tape gives good electrical continuity, so can be used to make bridged front and back cavity Farraday cage shielding for strats, etc. Have used it on a refurb of an 80s super-strat, and a traditional style "partscaster" build - works great on both. Seems to work quicker and better than the conductive paint stuff which is generally too much of a faff to bother with. Will use this stuff on all my builds going forward. Recommended.

Most adhesive copper foil has the disadvantage that the adhesive is non-conductive; hence, sticking one piece on top of a broken track on a circuit board won't work, you would have to use conductive silver paint as well to get a connection. So I was highly skeptical about this product, given that it costs about the same as regular copper foil. I stuck two pieces together and my multimeter reports that they are in electrical contact. So this stuff does indeed work as advertised and will come in very useful.

It absolutely is not conductive adhesive. Tested with multimeter both sides, only the non-adhesive side is conductive although it says both sides are.

銅とアルミを組み合わせることで、鍼灸の電位療法を起こすことができ、生体電気を整えることができます。

Ik gebruik deze tape om antenne's te plakken op (auto)ruit. Laat zich ook geweldig goed solderen. Handig!

Good

Ótima relação qualidade preço!

Parfait ! Pour ceux qui se le demandent, j'ai soudé sur les bandes et RAS. Faut pas s'éterniser, mais ça fonctionne. J'ai réparé une balance connectée qui ne prenait plus les mesures masse grasse / musculaire suite à un pipi de chat... Tout oxydé. Ça a fonctionné grâce aux bandes, elle fonctionne même mieux qu'avant !