63X55 Inches Reversible L Shaped Standing Desk Height Adjustable with Cup Holder, Electric Corner Computer Desk, Sit Stand up Home Office Desk, Ergonomic Gaming Desk, Rustic Brown

Alright, so I got the desk without all of the extras so just the base $300 one, it's L-Shaped and yes it goes up and down, the desk itself is definitely my favorite desk I have ever owned, giving me plenty of room and space for probably up to 3-4 monitors, I have two monitors one 32" and one 42" one and still plenty of space for another or something else even with my computer up on the desk. --- The Cable management system is in a prime position, I'd recommend a surge protector with an extra long cable to rest in the spot where the cord management box sits. Just because raising it to the top can be a little tight. I'm 5'9 so I never have to go all the way up, but definitely worth while. The Desk overall looks nice enough with it's fancy carbon fiber display, but the wood is not high quality but it is good enough quality that you won't really care especially for an only $300 price tag, I saw some stuff at Costco that wasn't as nice for $500-600. Pros: This is the best cup-holder on a desk I've ever seen. I never thought I'd be happy about a cup-holder but honestly, I may never buy another desk again just because of how great the placement and design of this cup-holder is, absolutely phenomenal, if they ever stop making this desk, I may just rebuild this one time and time again just for this sweet sweet cup-holder... Desk is cool too, no issues yet, I know some people have said they have issues after a month or two with it lifting, I'll check back if I have issues and follow-up with support and get back to y'all if I have issues. The Headphone holder is neat too, I have my Meta Quest 3 with both controllers on one hook, and my Arctis Pro Wireless series on the other hook and looks clean and holds them well, even with going up and down. Cons: The Directions could be better, luckily I've built a lot of furniture so didn't experience many issues but had to re-look at a few parts a few times to make sure everything was lined up correctly, not to mention had a heck of a time trying to get one of the lifting cylinders installed it was just a little bit too big, but I was finally able to get it in there and everything worked out, I'd highly recommend two people(just for the beginning steps due to balance, I did it by myself but the second person would probably have saved me a few curses), a really good philips screw driver you'll use it a lot, and the screws are probably going to get damaged if you use power tools, so definitely a hand screw driver. Probably a hammer if you need to knock down the cylinder a little bit to get it into place, I did a small tap and it was enough to get it so I could get it into position. Tl;dr: The Desk is great, I love it, cup-holder is one of a kind 5 stars for that alone, make sure you are using the right screws when building it, recommend hand tools only, 2 people would be ideal but I did it by myself in like an hour by balancing certain parts on others.

Previously I made a review about the desk where I gave it 3 stars. But after working closely with the company and sending videos to show the defect, they were able to send me further instructions and videos on how to fix the problem and troubleshoot it. Upon doing so, I ended up re-shipping the desk and getting a new one. The new construction was seamless since I knew how to proceed in the most effective way. Took me a lot less time and the desk works great. This desk is one of the best standing desks that is easy to assemble IF you simply follow the instructions to the tee. As I assembled the desk, I noticed the ingenuity and craftsmanship was truly well thought of. From the hole placements to the bearings, this desk was well designed. I would recommend this desk to everyone looking for a standing desk. The only thing I suggest about the desk is making the cord for the plug longer. If this desk is not against a wall near an outlet, the standing function becomes useless. Apart from the cord, this desk is A1.

Good desk. Took some time to put together but once we got it built, we were pleased. Sturdy and looks nice. Motor is quiet when adjusting up/down. Happy with the desk and the price.

I do love the desk but I have triple monitors and it’s a bit too much for the desk I think. It’s a bit wonky and the top is pretty thin and not 100% sturdy. It’s good for the price but I’d probably spend a little More for a more stable desktop.

So far this deal has been excellent. Using it daily for work and it is holding up well despite a heavier set up with quad monitors. Looks good and quite stable. A few extra cross brackets would make it very solid, but unneeded in my opinion. Height goes quite high for my 6'6 self.

As someone who has years of experience in wood work. I got a few pros and cons for this desk. Pros - Price fits the build of this desk. - The lift system is pretty solid and it glides really smooth. I like the reset option if you have any balancing issues. Movers had messed mines up. I thought it was toast until researched the reset feature. - Decent desk for someone who has a standard setup. Cons - One thing that jumped out at me was how thin the desk is. Not a big deal if this desk was made of solid wood or your setup is light. The listing says "Engineered wood" which on paper it is. But engineered wood that thin can bend over time from stress. The listing says up to 175lbs. But after 2 months with this thing the desk is already slowly bending in the center point from my two monitors desk mounts. Which I fixed by running some additional planks of 3/4 plywood from Lowe's. Which greatly fixed and even increased the strength. Even gave it a more thicker look. You dont have to run full sheets just need 2 planks. One for the front end and one on the rear end. - The cable compartment is cheap thin and flimsy. Dont even bother using it.

Edit again: never heard back since. Never received the placement part. They have yet to respond to my several status update requests!!! ——————————————————— Edit: I found an email on the Instruction Manual and they responded right away AND also called me. They were kind and will be replacing the defective part as I requested so I will not have to send back the whole desk. ———————————————————- Can’t put it together because the holes aren’t level for the screws! And of course, I work during business hours so there’s no way to reach anyone for help!

Produit conforme à ce qui est indiqué et surtout reçu plus rapidement que prévu.

You need a lot of space to build it, and some of the screws take some persuasion, but it feels solid. I have no wobble and the mechanism for the stand/sit positions works great. I have removed the cup holder as my chair arm kept banging into it (and there is plenty of space for a coaster on the actual surface). Wouldn't be an issue for most though!

Me he comprado 2, no digo mas La ventaja de poder poner la parte larga en el lado derecho o izquierdo, es que puedes adaptarlo a la habitación como mejor te venga. Yo tengo los dos escritorios montados ya que tanto mi pareja como yo trabajamos desde casa y con esto hemos podido organizar bien la distribución del despacho. Por ahora llevo 2 meses usando bastante el motor y no me ha dado ningún fallo. Lo tengo con una pantalla de 32", una torre gaming, un equipo de sonido, una impresora y dos portatiles y no tiene problemas para subir o bajar. es verdad que cuadno está arriba y lo usas para escribir, se mueve un poco, pero no es molesto. Los soportes de los cascos es un añadido muy interesante, aunque yo personalmente en vez de tenerlos hacia fuera como indica en las instrucciones, lo coloqué hacia dentro, así si paso cerca no los golpeo. Y el reposa tazas es muy bueno con los vasos, pero si lo usas en tazas, a veces se queda enganchado el asa y necesitas las dos manos para coger la taza. El montaje es recomendable hacerlo entre dos ya que facilita mucho la operativa

I got this desk on sale, so it was a great deal. Delivery was really fast, and setup was much easier than other desks I’ve had before. The motor is very quiet, and overall the build quality feels solid. Cable management looks neat too. I just finished setting it up, so I’ll update after a month of use, but so far I’m really happy with it. The light you see under the desk is from my old table I added it myself, it doesn’t come with the product. So far, I think this is a great product for the money.

Quality material. Holes in the wood doesn't align perfectly, some are off by millimeters(tolerable because there is a bend to the components as well), some are off by a lot and you need to screw in by hand. Drawer add ons would be nice maybe could be sold separately. 5 months update: Table top is very low quality and the steel skeleton doesn't support it fully. Only connection between 2 farthest legs is a slim rod running from the middle that are held together by the torque of 2 bolts. If only that flimsy rod would branch out to the sides to support the table top, it would have been sort of enough. But no, their screw points are very close to the middle of the table top so ANY weight you put on the wrong place bends the table top in a way that it angles itself to the weight you put in. Legs are trying to spread apart as you use the table, you have to pull them together from time to time. If you plan on using double monitor arm, you have to mount it very close to one the legs for the table to not bend. Even then it will bend the table but it will be tolerable. Table WILL TREMBLE if it has about 20kg's of monitors and stuff alike on top. I'm considering to rent a welding machine to improve the support of this excuse of a table.