How do you wash this plant-based "easy" resin from your print? is it just water, ipa, or a mix of ipa and water?

Hi，you can also find cleaning advice in the user guide Cleaning: Use a painter brush (or any brush made with hair) remove excess resins on the printed part with Use 95% concentrated Ethanol (preferred) or IPA to clean. Some form of methnol should work but make sure it does not contain acetone. Do not submerge the parts in alcohol for more than 30 seconds. After 2-3 minutes of cleaning action, remove alcohol with a hair dryer or air blower. For complex part with lots cavities, it may be a good idea to clean/dry multiple times. User can check by touching the dryed surface of the part to see if it is still sticky. If the dryed surface is still sticky, wash some more and dry again. Post Curing: Easy reaches its optimal strength when the printed part is post-cured with UV after cleaned. Use 395-405nm UV light and cure for about 1-2 minutes. Make sure resin is completely cleaned off and there is no alcohol left (it needs to be dry) on the print before curing. It is important to dry the print made by Easy completely before post curing. There is no need to use submerge in water technique with Easy

How does this "easy" resin compare to the fast gray resin? is it as resilient to breakage for mini printing? has printing with it been as successful

I switched from fast to easy to save a few bucks, and honestly has given the same results. I'd say durability and print quality are very comparable. I did up exposure between layers by about half a second but only did that out of caution with no real test to if it actually made a difference.

My cleaning station runs for 10-15 minutes. Is that going to be a problem to clean in alcohol for that long?

It may be a good idea to clean/dry multiple times. User can check by touching the dryed surface of the part to see if it is still sticky. If the dryed surface is still sticky, wash some more and dry again.

Manufacturer	Siraya Tech
Brand	Siraya Tech
Item Weight	2.2 pounds
Package Dimensions	10.28 x 5 x 4.92 inches
Item model number	Easy Grey
Color	Grey
Material Type	Resin
Number of Items	1
Manufacturer Part Number	Easy Grey

Siraya Tech Easy - Plant-Based 3D Printer Resin, Eco-Friendly, Rapid Curing, Low Odor and Affordable - Ideal for LCD/DLP and 8K Printers, 405nm UV Standard Photopolymer Resin (1kg, Grey)

التفاصيل

الوصف

المواصفات

الأسئلة الشائعة