LRS-150-24 Switching Power Supply, Single Output, 24V, 6.5A, 156W, 6.26" L x 3.82" W x 1.18" H

I'm using this power supply for my 24VDC Aoshike Bluetooth amp card, available here on Amazon. I've got the amp driving 2 6.5" 3-way BOSS speakers, and a 10" BOSS subwoofer mounted in a down-firing ported subwoofer enclosure. It really brings the amp to life, and makes my subwoofer "dance" across the floor. No "hiccups", no glitches, no lack of power whatsoever. This power supply makes my amp RATTLE THE WINDOWS... It doesn't generate hardly any heat to speak of. It's inside an enclosed box with no circulation, into which I put a thermometer. It never gets over 90°F. Meanwell is quite literally the best power supply manufacturer we have in this quadrant of the GALAXY. I won't buy any other brand. GOOD DAY

Another great meanwell PSU. I'm using this one for powering some LEDs for under kitchen cabinets (controlled using a ZWave switch, for control via HomeAssistant and Alexa). Voltage output is stable, even with some fluctuation in input voltage. Doesn't get hot (only slightly warm) at 50-60% of rated capacity. Being fanless the supply is silent (and no whining capacitors). Due to the large aperture grille in the case, and because I have it sitting on top of a kitchen cabinet, I decided to make/print a cover to go over it, but with a large gap between the PSU and the cover, so that there's still adequate ventilation. Doing so just reduces any dust that may otherwise accumulate over time, and affect the operation of the psu.

I got this as a replacement for my Worx Landroid because the factory plug stopped working. Works as intended and my robot mower works great again!

Bought this to power 24 vdc LED strips due to reviews indicating it was much better at holding voltage constant and delivering the rated power than cheaper power supplies. Checked voltage with a multimeter and it held constant at 24.12 vdc right out of the box. There is an adjustment screw to adjust the output voltage up or down, but I didn't need it and didn't touch it - if it ain't broke, don't fix it. Be aware that there is a slide switch to select between 120 vac and 240 vac for the input voltage, and that it comes set to 240 v by default. So most US customers will need to slide that switch to 120 vac before connecting. Also be aware that with any power supply (regardless of brand), you should limit the continuous load to about 80% of the power supply's rated max output. So with this one rated at 156 watts max output, it can handle up to 125 watts continuous load.

Unfortunately this unit didn't work for my needs. Doubly unfortunately, I'd scratched it up while testing it so couldn't return it. I needed a supply for a DC motor powering an X-axis feed on my vertical mill. Using this supply, when I first turned on that motor, it would start up, run for 1/4 second, turn off (due to too high inrush current, so the power supply overcurrent protection kicked in), and then come back on again (as the overcurrent protection automatically reset). By this time, the he motor's coil was still energized so that its inrush current wasn't quite so high, so the power supply overload protection didn't trip again, and so it "worked". But the on-off-pause-on again behavior isn't something you want from an X-axis mill power feed, so I had to replace this power supply with a stronger one, rated at 10A instead of this one's 6.5A. Once the motor is moving, it draws a measured 2.5A under load. But its inrush current requirement peaks at around 7.5A just for a half second. Unfortunately, this power supply's overcurrent protection kicks in immediately when its rated 6.5A limit is reached. I can't fault the power supply for this; it's doing it's job to protect your circuitry from more than 6.5A. But again, it wasn't suitable for MY needs. So it'll sit on my spare parts shelf for some time before I may find another use for it eventually.

This Meanwell LRS-150-24 (24V/6.5A) Power Supply helped me get my old MacPro & 32in Cinema Display back up & working. This machine sat unused after the Apple power brick for the display died. It runs just warm to the touch even after hours of use, and fanless design is very workspace-friendly. Meanwell quality coupled with Amazon Prime delivery got my workstation back up quick when I needed it for some Fusion360 work on the weekend. Here you can see it just knocked together quick for testing; now I guess I need to use it to design and print a box for the Meanwell!

Does what it should.

Mean Well makes rock solid power supplies (just make sure it's really a Mean Well and not a knock-off). I use this one to charge the batteries in a 24 volt solar system when the sun is not out. Works perfectly.

works find. Good product.

Works perfectly as expected

Very happy

Have mine running and outputting 20.5 V for a couple of weeks straight so far. Works awesome. Wish it had better instructions.

Using this for some landscape lighting (100W load). Works flawlessly for that purporse. FYI: Tested the voltage adjustment - registered ~22V to 30V