5x3 FT Outdoor Storage Shed, Tool Shed with Sloping Roof and Lockable Door, Metal Shed for Backyard Garden Patio Lawn, Brown

Llegó algunas piezas dobladas y ralladas

Good product for the price. A few misaligned holes that were simple to drill and it was not a full 3 feet deep but good otherwise. It will take two people to assemble. Instructions and parts were complete.

This is a "tin" shed. You get what you pay for and it has exceeded my expectations. Overall took me 2 hours to build and I recommend a second set of hands for the first few wall panels. Instructions were better than Ikea (clear with some words). Some holes didn't align but drilled through fine. Overall 90% was perfect during install. Likely 10% was my mistakes. There is no floor included in this shed. Even if you have a solid concrete slab I recommend putting on plywood as there are holes to secure it to. This makes it more water tight. With mine I build a platform out of 2x4 to keep it from sitting directly where water can puddle. Inside storage is good, fits my shovels/rakes weed eater (at an angle) and I found some shelves that fit the width length for great storage. If I had more room I would upgrade to a larger size of this same shed! Also it is worth mentioning this is not air tight. the ceiling does have gaps making it breathable but large enough for small critters to get into.

I’ll start by saying I’m typically good at assembling products of all kinds by myself. In this case, I needed help - which was a first. The panels are very flimsy and it is difficult to align the holes at certain stages. You can get in a flow then be slowed down by poor alignment, insufficient instructions or hard to reach mini bolt-nut locations. The roof was the biggest issue - The screws along the forward edge have nothing to engage to - I added strips of wood (see video) to solve this serious flaw. Also, the left and right outer roof panels must be placed a certain way (for specific hole alignment on the outer most edges) but the instructions do not show you this. Once completed, it’s an ‘ok’ shed although anyone can break in to it with ease. It’s says 2-3 hours for assembly… it took us 8 hours. Ultimately, it will serve its purpose but at the cost of one of the most frustrating assemblies of all time. Tools used: electric screwdriver, socket-wrench, pliers, manual screwdriver to tighten. Assembly: 1 out of 5 Price: 5 out of 5 Quality: 2 out of 5

This is a great value for a small shed. It arrived before the anticipated arrival date, and was packaged well. There was a small ding in the box which resulted in a dent on 4 of the corner pieces. Honestly, it’s so minor wasn’t too worried about it. It is NOT the highest quality and the metal material is thin and pretty flimsy. That said, this is a budget shed and still a great value. It assembled easily and there are some videos on you tube although the instructions were well written with very good illustrations. I do have an issue with door closing very tight and I had to flip the latching hasp upside down to accept the bolt (required drilling a small pilot hole for the screw). It was estimated that two people can assemble in 5 hours; I did it myself in less time, in the dark, with a flashlight (would not have been possible in the wind). I’m planning to make some modifications to create an exhaust port, add electrical outlets and use it as a place to keep my generator out of the rain and snow on some rural property. I would definitely buy this again as a smaller budget shed but might not give it a prominent spot if I had a meticulous backyard.