How to I install the seat?

No instructions—written or visual. I have installed MANY toilet seats in my 68 years, but this is not like any other. Directions for dummies 101: in the plastic bag are two grey bolts and two black wing nuts. The toilet seat cover has the hinges attached. I popped the hinge caps off with a screw driver. Set aside. After removing the old set, put the two grey bolts through the holes in the toilet from the top. Underneath place the black wing nut on the bolt. I could not just screw the wing nut onto the bolt as the nut has a protruding piece which hit my toilet. So I held the wing nut in place keeping the protruding piece flush with the toilet and screwed the bolt with the screwdriver from the top of the bolt so it was snug—not too tight as with any plastic tightening too much will cause the plastic to break. With the hinge caps still off, set the cover over the top of the bolts. It should fit nicely. Place the hinge caps over and rotate to the locked position. It took no force to accomplish this part. Really simple and easy once you figure it out. Instructions would have been helpful.

How large is the "hole"?? I presumed they are all standard, but the one I have now is smaller that before..

Seat is 14 1/4 by 15 1/2. Hole is 8 1/4 by 10 1/4. Overall length fr the hinge holes to the front is 17". Hope I didn't give you more than you ask for.

Will this fit a 16.6" X 14" round toilet?

It fits the 14" wide but may be shy on the 16.6" , unless your measurement is from the screw holes to the front of the toilet. Then it would be fine. My toilet is standard round, like most are unless you have a more commercial style one to fit it on.

Brand	Bemis
Model Number	500EC 000
Product Dimensions	41.91 x 41.91 x 2.51 cm; 2.63 kg
Color	ホワイト
Material	Wood Toilet Seats
Quantity	1
Are Batteries Included	No
Item Weight	2.63 Kilograms

お掃除・取替が簡単な丸型木製便座シート。 Round 500EC WHITE 1

التفاصيل

الوصف

المواصفات

لديك سؤال؟ انظر ماذا طلب الآخرون

الأسئلة الشائعة