Can this device take wifi input (not ethernet / cat 6) and convert it to a ethernet output (cat 6)?

Yes, you could setup like this: WiFi--->GL-AR300M16-Ext---(ethernet cable)--->Your devices

Can I change one antenna to a directional antenna and use in repeater mode?

You could change the antenna, the antenna is uFL to RP-SMA-Male.

If I connect an external antenna do I have to have something connected to both antenna ports and if so do they have to match or can I leave one empty?

Coverage will likely be better with two similar antennas connected. One antenna connected would not, most likely, cause any circuit failures. GL.iNet has indicated to me that dissimilar antennas is acceptable. In my case I tried a WiFi yagi on one antenna port (supplied antenna on the other) but it did not improve signal strength to my internet source in my particular situation. I would suggest you give it a try and see if it works for you.

Brand	GL.iNet
Model	GL-AR300M16-Ext
Product Dimensions	5.8 x 5.8 x 2.5 cm; 40.82 g
Item model number	GL-AR300M16-Ext
Ram Memory Installed Size	128 MB
Operating System	RouterOS
Compatible Devices	Laptop
Special Features	wps
Colour Screen	No
Voltage	5 Volts
Batteries Included	No
Batteries Required	No
Data Transfer Rate	300 Megabits Per Second
Wireless Type	2.4 GHz Radio Frequency
GSM frequencies	2.4 GHz
Number of Ports	3
Connector Type	Ethernet, USB, Wi-Fi
Has Auto Focus	No
Includes Rechargeable Battery	No
Programmable Buttons	No
Item Weight	40.8 g

GL.iNet GL-AR300M16-Ext Portable Mini Travel Wireless Pocket Router - WiFi Router OpenWrt 2 x Ethernet Ports OpenVPNWireguard VPN for Public Hotel Wi-Fi USB 2.0 Port 2 x External Antennas.

التفاصيل

الوصف

المواصفات

لديك سؤال؟ انظر ماذا طلب الآخرون

الأسئلة الشائعة