DAP® Weldwood® Contact Cement - Bottle

Used DAP Weldwood Contact Cement for a kids ride-on tire project and it worked exactly how you want contact cement to work: apply to both surfaces, let it tack up, press together, and it grabs hard. Once it makes contact it’s basically “done,” which is perfect when you need the tire material to stay put without creeping or peeling. I likely didn’t need the extra nails but used for completeness as a belt and suspenders approach. Bond has held up well to real use (rolling, turning, and kid abuse). The consistency is easy to spread and it flashes off quickly so you’re not waiting forever between coats. Tips that matter: prep is everything so clean/degrease the tire and scuff slick plastic/rubber, apply thin even coats to BOTH sides, and give it enough tack time before joining. If you need a reliable adhesive for tire-related DIY fixes/mods, this is a solid choice.

Perfect for small repairs, crafts, or DIY projects. Very satisfied with the quality and would recommend it.

Great for many gluing uses on flexible stuff like sealing cork on Birkenstock shoe soles, gluing rubber, or cork, etc. Good product.

I have been using this cement for several years for generally repairing soles of shoes that come apart. It has been the best way to do this with a hold that actually works. To attain maximum adhesion you need to coat both parts and wait at least 15 mins before putting it together. I usually also clamp it for a few hours also. I also use this cement for anything that needs to be glued, where Super Glues don’t fit the bill. Over the last 10 years the cost has really gone up and this package for 2 cans is the best value I have found. There are other cements out there, but usually they are more costly, which has discouraged me from trying them. I do know that Dap Wellwood Cement works very well and achieves a super strong hold.

This works great! I used this to make a Halloween costume with EVA foam. It was easy to use, got tacky within 15 mins and had a strong bond. A little went a long way and I was able to sand it. It does have a strong smell but in a well ventilated space it's not bad. I had to use pliers to open the top. I wish the brush was a little smaller in width. It made gluing some smaller pieces more a little harder.

Easy to apply and bonds as described

This glue really works. Apply to opposite sides, let dry for 5 minuts and press the two pices together, and wham, they are glued together with a strong bond. Highly recommended.

Easy to apply, bonds instantly after required drying time.

Muy buen pegamento, es contra agua y tiene excelente firmeza de adhesion

Had to wait longer than expected but it worked better than expected on plastic surfaces.

Muy buen producto cumple al 100% lo recomiendo lo puse a prueba en un artículo quedé satisfecho