Adjustable Fletching Jig Straight and Helix Tool with Clamp for DIY Archery Arrows Shafts

Worked perfectly and decent priced.

Work really well. You’ve gotta adjust it all but the benefit of that is that you can get exactly what you want. Ended up replacing two arrows fletchings with some spiral ones and they shoot real straight. Love it. And really easy to use too

This is my first fletching jig, I was able to figure it out pretty quickly... the clip feels plenty strong, and its adjustable in all directions as it should be. I've done a few arrows, so far so good!

Good bang for the buck. Wanted to fletch my own arrows, but didn't want to spend a lot of money to do it. Took me a couple arrows to figure out the right technique and angle, but once I did I was all set. The magnet feature is really nice. I've only used the 3 fletcher helical because they shot good.

Works great if you take your time and adjust everything correctly before starting your arrow. Comes with the regular vane clamp and a helical clamp as well. Picture attached is of a 3 arrow 1" group at 20 yards.

It works but it's light and arrow lays in loose so easy to misalign handling, took me one arrow I messed up and to get adjustment right. Not fond of the magnet for the clamps , would be nice if it could slide into some space to secure . It works but it's getting used to and have to adjust it properly to get even spacing of the vanes . But hey .... still cheaper than having to buy new arrows for my ravin crossbow.

I'm fairly new to traditional arhery and figured I'd try making and restoring some arrows. This jig had mostly good reviews , shipped quickly, was priced right and seemed to emulate a famous brand so I gave it a try. On first inspection the jig seems to be solid and decently made. It's only when I went to actually use it did I find issues as follows: - There are no alignment/reference marks on theadjustable magnet holder to help with aligning the clamp (and feather) on center of the arrow shaft. -There is VERY limited visability of how the fletch sits on the shaft. You can only view it from the right side. The front, rear and left side views are completely obscured. -The jig does NOT hold the arrow shaft in parralel to the jig. IWhen installed, the shaft points off the the left at a nocicible degree. -Instructions are all but non existant. So what this means is that there is ALLOT (!!!) of guessing /trial and error when setting up your clamp/fletch to sit exactly top dead center and along the center line of the shaft. There is no way to visualize and measurements on the plastic pieces are hard to take even with a digital vernier. Since nothing is at 90 deg/square, it makes set up even harder. In the end, I spent an hour plus trying to get the firs fletch right. I finally had to resort to tac gluing the fletch in place for 10 min before removing the clamp and adjusting both angle and center again. Once done, I had to strip the fletch and clean the glue off both the shaft and fletch. :-( Now that this was finally done and "close enough" , I was able to mark the underside of the magnet holder to show where the right settings are. However, that mark is only good for the one diamiter/spine arrow. Next batch will force me to go through this again if I use a different shaft. Bottom line: It works but not as well as some other brands . I would NOT buy this one again.

Awesome product. Figured it out super quickly and it worked well. 2” blazers went on perfectly at 120* and I used the straight fletching clamp though a right helical is provided too! You can set the fletching where you please which is nice as I like them close to the knock, better flight at longer ranges. Comes set up with the 3 fletch, seems easy to change to the 4 fletch if you shoot a heavy arrow. May try those with my 427 grain gold tips. Make sure you set it up square with your shaft, I use basic gorilla super glue to adhere mine. This is a legit product and I’m a return customer, though the product does seem sturdy and well made. 3/16 holes drilled already to mount to a bench but a flat surface it will stand up all day. Give it a try.

Product is easy to set up and use. Looks to be solidly built. Two thumbs up!

I thought this jig may be a too lightweight for the job but it is made from tough plastic with good features. The three fletch setup was incorrect out of the box but easily adjusted. It works adequately so far and is easy to use. Instructions are poor but ok if you know what it’s meant to do.

parfait pour un amateur comme moi

Have just started fletching my own arrows to replace damaged vanes on existing arrows. Initially bought a cheaper tool which simple bogged up with glue and became unusable after 2 fletching jobs. This tool is highly adjustable, great value for money, easily cleans up with the removable and magnetic clasp, and places the vane in the correct position every time with the 3 or 4 vane adjustable dial at the end of the arrow.

Funktioniert wie es soll. alles gut