Platinum Series Case Prep Center with Hardened High Speed Steel Chamfer Debur Tool and Large Small Primer Pocket Scrapers

It's heavy so it won't walk off across your bench. The 4 mounts turn faster than most others, but not too fast. 200 RPM is a good speed and gets things done reasonably quick. It does make some noise, but no more than any other electrical motor of it's size and purpose. My Rigid cordless drill makes "far" more noise than this! Comes with the basic attachments you need to get the job done and you only need 3 of them to prep your cases. A case chamfer and duburing tool, as well as a primer pocket cleaner/reamer. The 4th can be used for a primer pocket brush, a case brush, or an internal flash hole reaming tool. I only wish it came with a stand/bracket or lift of sorts to set it at a comfortable working angle on the bench. Your choices are horizontal or vertical. I don't like vertical because I think over time the brass shavings will potentially get into the mounts' shaft bushings/bearings. Sitting horizontally, my knuckles hit the bench at times when using it and I find that personally bothersome. Otherwise it's a fine prep center and I'm very pleased with it! It has rubber end caps on the unit with built-in feet/rests to keep it in place and muffle the noise somewhat. I'll fashion a rest for it so that it'll sit up at a more comfortable angle for me from the bench. A real time and hand saver I wouldn't want to be without. Especially for large quantity's of brass case prep!

If you're lookin at this, you know what its for and can do... get it... i been doing all my prep by hand for yeeeeears and this significantly speed up my reloading prep by 10x. Mine doesnt get hot or overheat or none of that nonsense that I read in the few negative reviews and I'll run mine for a full 2-3hr straight, usually during a movie and just sit there doin brass and annoying the family at the same time, which is great (for me). If I have to sit through a darn singing cartoon character for 2hrs they get to hear the sweet screach of brass chamfering.

Works great at an affordable price. After processing my own brass for years and years by hand, I finally reached the age where my hands can't do it any longer. Bought this and really wish I had purchased this years ago. It works great!

This case prep tool is fantastic. Highly recommend

First let me say: the best way to trim brass would be one of the three-way-type trimmers that chamfers and deburs the case mouth in one operation. But, if you are like me and don’t have that, this case prep is a must have! I leave it set up and do a hundred or so at a time in between other reloading operations. I mainly have it for .223 case prep but the debur head will also remove the crimp for primer pockets. I swage all rifle pockets on a Dillon Super Swage but use this for the occasional 9mm pocket that is crimped. I don’t check pockets prior to loading 9mm but can “feel” the occasional one as I am priming on my Dillon press. When I feel it, I take that case over to this prep center and hit the pocket for just a second and it nicely removes the crimp. It doesn’t take much, and there’s no stop, so you just have to do it by feel and look at it. It is obvious when the crimp is gone. Then I put that case back into station one and keep going. It works good for cleaning primer pockets as well. I keep a second pocket cleaner in station 4 just to keep all the grime from falling into the threaded station since I use the unit vertical. If you are chamfering and deburing, you need this today! One of the best 100.00 items over purchased for reloading that I would buy again in a second if I needed it.

The prep bse motor is heavy duty, the speeed it runs is not too slow or fast, it is just right. Buy it if you need to speed up your case prep and save hand fatigue. Won't be without one from now on.

I was using a manual tool to de bur cases. It was hard on my wrist and tiring. Now I can prep cases in a short time.

This little machine will cut your brass time in half. It is perfect for the reloader that shoots a lot of rounds. Capable up to very large calibers and it works very well.

Item as described. Better than described actually.

Works great

I ordered this item by mistake, thinking it had the trimmer attachment but it didn't. The seller was great at giving me a refund once the item was returned.