Rain-X® Windshield Repair Kit | Repairs Cracks, Chips, Bull's Eyes & Stars | DIY Windshield Crack Repair Kit for Cracks Up to 12 Inches | Advanced Resin Repair Formula

I know it seems impossible but this product does fix the cracks in your car’s windscreen. I was skeptical before I bought it but seeing positive reviews I thought there isn’t a harm in trying it out. A small crack on the side of the screen doesn’t bother me much, but the crack on my car’s windscreen was right in my line of sight and thus used to bother me a lot. This product isn’t magic and the crack won’t disappear completely. But it will fix 90% of it, like you can still see where it used to be, but it won’t be prominent at all. I would suggest to definitely try the same out

Useless product as it does not perform to the expectation. I had a very minor scratch like chip on the windshield. Applied the product as per the instructions in the manual. The chip was visible from inside as well as outside. The chip was still visible from inside the cabin and outside. It just applies a coat over the chip surface but the chip is still visible. Not recommend if you are looking a complete removal as mentioned in their product packaging. It definitely does not remove the chip.

It covered the small chip on the windscreen upto 60%. Good thing is it filled the crack to prevent further damage.

Superb

While it fills the bee shaped superficial stone hit crack from the glass, it doesn’t remove the mark at all

This thing is no less than magic. The crack on my windshield is now barely visible. The instructions provided are simple and easy to follow. Saved me lot of money from replacing the whole thing.

The product does not abide to it's specifications that are mentioned and moreover the crack in my windshield exceeded after putting the fluid. Using it is a utter waste of time. Don't waste your time and money.

I was very sad about my crack glass then one of my friend suggest me this, after applying i have got 100% result for me it is a new and a great experience it reduces upto 95% of the crack still i am satisfied. Thanks to rainx brand

جيد جدا

Got a rock chip in the eyebrow of my windshield. I didn’t see it and it cracked on me. I was hesitant about this product but heard some positive feedback that this product helps with cracks as well as chips I figured it was worth a shot as a new windshield was in the ball park of 389.00. Followed the instructions and it worked well. I also used a lighter on the inside to help eliminate the bubbles and assist with not having to put too much pressure with my fingers The crack is still visible but not as bad as it was. Time will tell if it will prevent it from expanding. So far I am very happy with the results

I didn’t expect much when I bought this to repair a chip in my windshield. But this product did a fantastic job. Instructions are clear and that makes it easy to use. I have attached photos of the chip but there is no point attaching photos of the repaired area as it looks like new, like the damage was never there in the first place.

Instructions were clear and concise though reading them first before attempting to use this product is definitely a benefit. The resin WILL leak out if you tighten the driver too much. Have a paper towel handy to mop up any leaks as the resin is indeed runny and there is a good chance it will get on your fingers (especially during the initial opening of the resin bottle; mine required a plastic plug to be cut off the tip). It's easy enough to clean up before it's cured and seems to come off hands easily with hand sanitizer/rubbing alcohol. The directions encourage you to repeat application as necessary until the crack/chip is satisfactorily filled, which may be necessary because, as other reviewers have said, this is definitely something that will take at least a try first before you get it right consistently. In my case the damage I was attempting to repair was a crack about two centimeters long with a couscous sized chip in the center. After the first application (steps 4 - 5), curing strip with a touch-up dot of resin (step 6), and second strip with resin pressed into damage (optional with step 7) all that was left was a shadow (for lack of a better word) of the crack a few millimeters under the surface as well as a slightly blurry, but flush, filled dot where the initial impact was. Removing the dried, excess resin is as easy as removing decals from a windshield. The package includes a razor blade which will safely remove the dried excess resin when used with a bit of pressure (without scratching your windshield! Believe me I was skeptical at first). Total time took about 30 minutes from start of process to putting everything away. I was left with maybe a half bottle of resin left but I seriously over applied it. To guarantee reliable shade followed by reliable sunshine (it's required to apply the resin in the shade, then move the vehicle to sunshine/remove the shade to allow the resin to cure) I waited until the weather was anticipated to be clear and sunny, drove to a local parking garage to apply the resin inside the shade, then moved to the top floor to start the curing. Overall very satisfied. I will update this if I notice the crack spreads despite using this product. UPDATE: It's been about 5 months (I think) since applying this product and I have noticed no change in the results I had seen back then, and that is with the windshield experiencing temperatures of over 100 degrees over the past few weeks.

It was a very easy product to use and worked really well on my stone chip and cracks.