AC Compressor Clutch Hub - YB-3111

Fit my 2007 F150 factory compressor. Appears to be a genuine Motorcraft part. I managed to break the 8mm bolt holding the hub, so here is the part number for that W711877-S437.

Easy to replace and solved the issue. Old pulley was slipping. Perfect fit.

I put in year. Make. Model and etc told me IT FIT MY VEHICLE and the way they made it they left extra metal on top and it didnt fit the right part. Cant even shave it down. My point is i bought it and cant even return it because of how my husband manhandled trying to make it fit.

There was no gap between the old clutch plate and pulley. Clutch activation made no sound due to the absence of a gap. The outer rivets spun but the inner rivets did not. The inner portion could be turned by hand so the compressor was not seized. To replace this plate the refrigerant did not need to be recovered. The compressor did not need to be lowered from the mount. The serpentine belt did not need to be removed. The center 8mm bolt was removed with a 6 point socket and the washer in the plate recess was swapped into the new pressure plate. Installation was tricky as the washer fell out despite an angled fit up. Maybe the coil pulled it out. The old pressure plate inner portion had delaminated or the rubber bond had failed. Repair took 10 minutes and ice cold air was back during the hottest summer in record.

2010 Ford Expedition 5.4 3v easy one bolt removal and installation 20 minute repair. Old rubber material between inner and outer clutch ring deteriorated causing clutch to make loud noise when ac activated. Clutch spun freely indicating compressor was functional. Mechanic wanted to replace whole compressor this was a $50 part saving big $.

Worked very well for 2007 f150 5.4 triton Did not look like it was used.

The product was great the shipping was bad it was late didn’t come when expected

Perfect replacement part. Old one came off by itself in pieces. If that is the case, I’d recommend saving for new compressor as mine was completely shot. Oh well it was worth a try to see if it was salvageable! Even had to replace bolt and washer shim I forget the size but it was small and metric…. Check forums for more info.

Great fit

Worked well

Good product works awesome

Took a while getting here. But an exact fit and flawless.

10 minutes and it worked. Don’t forget to get the shim/spacer out of the old clutch to have proper spacing.