DEPO312-1186L-AS Replacement Driver Side Headlight Assembly (This product is an aftermarket product. It is not created or sold by the OE car company)

The headlights arrived in a box, each. The packaging is a bit lose, but not enough that the unit is loose in the box. The headlights come with a thin, plastic film on them to protect while in transit. I've removed this film once they were installed on the vehicle to prevent small scratches while I installed them on the truck.These lights fit just perfect, they even came with lightbulbs. There was some aiming to be done at night, these reflectors, like original ones can be adjusted vertical/horizontal. I recomment you check the aiming at night after you install the lights.They look shiny, and really enhance the appearance of the Tacoma when installed. It's a big difference from the old, work, faded, cloudy original headlights. I used about every product to polish them and gave up, ordered these, and I do not regret it. It was a great investment, and great pricing in Amazon for these.I hope to once in a while use headlight protector on these to prolong their appearance.

Checked with local body shop and auto parts place. They wanted $280.00 for the headlight alone.. I found this or less than $60 bucks and thought it was either junk or impossible to install. I got it in and it looked good except for one tiny, pin head sized bubble in the headlight lens. I guess it is a factory second. But for $60.00 I'll live with that all day long. It came with all the bulbs and everything. It took about 30 minutes to install, I had to remove the grill and headlight trim but that would be true for any headlight for this truck. The fit was perfect! I couldn't be happier with my purchase and over $200.00 savings!

ordered both lights one shiped before other but only three day apart, install isnt to hard but like everyone else that bottom bolt on the insde of the fender is hard to get in and out. Lights look great, I live in washington state so we will see how they hold up in the rain. so im gonna give four stars only time will tell. well i ran my truck through a car wash lights didnt leak. still holding at a four start we wikk see how they hold up with time abd elenents.

I have a 2005 Tacoma 4x4 with 98,100 miles so you can imagine how frosted the originals were! Buying these from the dealer would have easily cost me 3x the $55 price tag from Amazon/Depo. These came very well packed with a plastic cellophane covering to protect the lens from accidental scratching during installation. They bolted right into place without absolutely any issues whatsoever! These also come with brand new light bulbs so you'll have to separate the stock socket from the bulb assemblies using a small screwdriver. Here are a few hints to help with your installation: 1) Purchase a bag of those plastic Toyota/Acura body clips from Amazon because you'll destroy the ones you remove. 2) Also, if you've never done this before, do yourself a favor and go to YouTube and look up the "Spyder lights installation for Tacomas". This YouTube video will take you step-by-step through the Tacoma Headlight removal process (don't even attempt the job without studying the video!). 3) Then, to install your new lights, just reverse the process. Replacing both headlights took me about an hour because I like to take my time (you could probably put them in faster)? 4) Do yourself a favor (if applicable) and order the replacement fog lamps too because chances are especially on a high-mileage Taco, these would be frosted too? Since part of the process calls for removing the bumper fascia, you'll have an easier time replacing the old fog lamps instead of afterwards (like me) when you have everything back together again! 5) You'll need a "creeper" to make it easy to work underneath your front bumper. It's that red, rolling dolly you see mechanics lying on whenever they're working under the car. Any self-respecting DIY auto mechanic always has one. But it's simply amazing how pretty your car/truck becomes with the installation of brand new lights?! Thank you once again Amazon.com for providing high-quality, hard to find car parts for us "little" guys! On a scale of 1 thru 5 (5 being the toughest auto mechanical job you'd take on), I give this job a "2"......Easy-Peasy!

Replacement Headlight assembly looks great and fit perfectly. Quality looked good, until I needed to adjust the headlights. The adjustment screw on each headlight just spins and spins without making any adjustment at all. Clearly not OEM quality. I was finally able to get a very slight adjustment out of the headlight that needed it but this was after many complete rotations of the adjustment screw. Fortunately the adjustment needed was minor and not worth removing the light assemblies to return to seller. You really are taking a chance with these aftermarket headlight assemblies.**update 1/25/17: at this point I have to update my review to 1 star. Only because zero stars is not an option. After only 2 months on my car, one of my headlights now has tons of moisture or condensation inside the lense. Not quite sure how they can sell a headlight lense that is not sealed from moisture. The car has hardly been driven for a while but we had rain this last week. Would definitely not recommend.

ok for the money looks great and fits perfect you can't really adjust the aim of the headlamp other then very small incremental changes from left to right, tried sealing the edge seams but still leaked in water and condensation.

So far so good. Perfect fit. Came with bulbs installed. Pretty much identical on the visible portions except for the DEPO watermark in the lower corner of the clear plastic. Foam edging among top seems to be a little softer than the old stock one but that could just be age. I haven't driven out at night yet to see how the beam alignment is. If there's issues I will update. FYI you will need to remove some of the screws and pins in the wheel well holding in the bumper to get access to one of the attachment bolts, along with the grill and small strip under fixture (which has one pin and latch that needs to be undone then pulled from socket on outer edge).

For 2007 Tacoma TRD V6. Great OEM replacement. Looks like new.