ZZAW B1 ITX Computer Case for Desktop PC Mini Micro Slim Portable 2021 Mid Tower Small Smart Aluminum Alloy Chassis Support Long Graphics Card SFX Power Supply for Gaming and Home Use

This case took a little longer to get to me due to the pandemic lock downs and it shipped from China. However, when I got it all together it was well worth the wait. Fits my ASUS Mini-ITX board and full size ASUS TUFF GTX graphics card perfectly. It is lightweight, attractive and keeps the internal temperature nice and cool with the two large chassis fans on the top and ample, attractive ventilation holes across both side covers, top and bottom of the case. All necessary hardware was included with the case.

This case is by far the smallest case I've built in and it is hard to assemble. You have to be very careful about the components used inside as the compatibility can be very tough. With the latest RTX 30/40 series GPU getting bigger and thicker, there are only a handful of GPUs that fit in the case. The GPU clearance is about 300mm in length, however u can realistically fit GPU less than 290mm due to routing power cable behind the GPU. Gpu thickness is limited to around 2.3 slot. The CPU cooler is limited to 60mm, which restrict the CPU to low power i5 or ryzen 5. Build quality is average at best, the aluminum shell is about 2mm thick and 2 acrylic side panels about 3mm.All in all i would not recommend this case for beginners, as the cable management and component selection can be very frustrating. The worst part of all you have to go to chinese website taobao for assembly instruction makes things even worse.

The riser cable would not work with 3 different GPUs. Sometimes causing boot loops

this case is garbage but it's the only sff case i can find. reordering, but i dont have high hopes

Pros: Small size and looks pretty cool with its aluminum alloy chassis. Lot's of open vents for air flow.Cons:- No dust protection. I expect this case will accumulate a ton of dust, so in practice it is completely impractical.- Side panels are made of acyclic. At this price point I would definitely have expected tempered glass.Overall: I think this should be under $60 for what it is. The lack of dust control is an absolute deal breaker for me. I should have realized that it had no dust protection before ordering it. I ended up going with a Cooler Master NR200P, which is a bit larger but has dust protection and supports more fans.

I will start off by saying the airflow is pretty good in this case. The side panels are not as see through as the pictures show. I had to slightly trim the plastic off the back end of the cooler of my zotac rtx2080 amp extreme to make it fit. There are 2 spots for ssd's to mount on the bottom of the case, but since it's so close to the bottom, the average sata power cable from the power supply will not fit unless it's the last at the bottom that's flat and doesn't have any extra wires. This case is extremely tight inside! Cable management is a nightmare, but with enough zipties it's OK, you won't really see the cables inside.. the included fans inside can be replaced with a 120 or 240mm radiator, but install that first before anything else! The screws won't be accessible. Back to the side panels, it's the least appealing part of the case, they're more of a cream, and it makes any rgb components look bad inside. Its still a very small form factor pc, and has good airflow which is why I gave it 4 stars. The included pcie extender is good quality, and has a mounting point in the case, but I only had 1 screw instead of 2 holding it in because the gpu wouldn't have lined up properly.