TRUGLO Pistol Red Dot Sight Mount | Tactical Hunting Shooting Lightweight Durable Compact Dot Optic Steel Mount Plate

Qualifacation: I needed a reddot mount for my CZ P10C without cutting into the factory slide. I have not found it best to remove that coating for any reason. So I found this work around.I was gifted a reddot from a friend and never looked back.My testing has included your standard torture tests with racking the slide off of tables, truck tail gates, shooting frames, and my leg. My leg faired the worst because I hit it with a glance. It maintained zero to this day.Tip: This raises your height over bore significantly and you'll need to adjust your dry fire to accomodate that.

Dovetail Fit was perfect on the Glock 26. I did have to lightly drift the plate into place using a steel punch and small piece of electrical tape to protect the finish. The plate seems to be made of high grade steel with robust plating so no worries for me to drift the plate into place.Now for those who have no intention of returning the plate, the extra holes both on the dovetail and behind can be tapped for 6-32 x 1/4 screws for added hold down of the dovetail, which should be fully tightened. The two fore and aft screws that come with the plate are for anti-vibration stability only and should only be brought into snug contact with the slide, without tightening. I also tapped two extra holes in the front, keeping away from the radius of the Glock slide, for added anti-vibration stability.There are a few high speed videos on the net showing that all dovetail plates, steel or otherwise, benefit from having stabilization screws. The TRUGLO steel plate is the only plate I know of that comes pre-tapped for one screw each fore and aft, which really is sufficient.

I bought this in hopes it would fit my SW M&P Shield. I ordered the exact one it's says it fits. I brought this to a Gunsmith to have him look at it once I encountered resistance that was not right. He stated that this mount was actually milled to large for what they said would fit. He ended up machining it down so it would work. After he did this it was still very tight and glad I brought it to him. Buyer beware as you " might" get 1 that fits.

I had to shave down some of the metal from the mount in order for it to fit my CSX but it works

It's a great product if you understand, like I did, that it will require some fitting going in. The dovetail that slides in to the grove on the gun's slide needed to be 'adjusted' a bit to fit. That means some filing and or sanding. If your cool with this, you set, if not, take it to a gun smith.

This was the most difficult install I’ve ever done. I tried tirelessly for over an hour to get this thing on and ended up having to shave some of the dove tail to fit. Finally, I got it to seat correctly. Do yourself a favor and get your slide milled if you’re going for a red dot.

I was surprised at how much thinner this is compared to the other options out there. It is very well built too. I am using it on a Glock 20 with a Holosun 508t. Even after a few hundred rounds it is still in the same spot and allows the use of the suppressor height front sight in the sight picture. The first one I have seen that this works. You don't get the full sight like you do with a slide mount, but still. Is very light. Definitely recommend if tou are mounting a red dot and don't want to send your slide out for a few weeks to get cut.

Was supposed to fit my boyfriend's gun and didn't. Very disappointed as it was a gift 😞 got his hopes up for nothing. Buy at your own risk you never know may fit yours.