for iPhone Xs Max Screen Replacement,LCD Display 3D Touch Digitizer Assembly with Screen Protector+Repair Tools Compatible with iPhone Xs Max 6.5 inch (Model A1921, A2101, A2102, A2103, A2104)

It is excellent product and sheaper then local marketThe product high quality

Review for XS Max Screen: I really like how it’s touch sensitive. Display color is good. Day 1 so far, pic taken from a 7 plus of the finished product. They give you everything needed for the replacement, screen protector is good as far as it has a black liner to make the screen protector blend in with the black edges of the new screen which I really love, we’ll see regarding the durability of the screen and protector.A warning- REMOVE the SIM card tray, EVEN if it’s empty. If you don’t, the screen will come off with light heat but it’ll split in a way that blends in with the edges of the inside of the phone, and it’ll be a real pain discerning the ear speaker parts. If that happens, DO NOT pull on the ear speaker or any part of it aside from disconnecting the ribbon cable part only from the phone base, after you unplug the ribbon from under the plate, find the edge of old screen and separate that properly, slowly, carefully, and once it’s disconnected from the cable to the actual phone, it’ll just lift off with the left over screen metal/black lip lining the interior phone edges, use new screen as a reference for any old screen parts that may have stuck to the ear speaker- as you do this or it may even slide apart. Again that’s ONLY if you forget to remove the SIM card tray.Make sure to install the interior glue liner BEFORE you connect any cables to the phone base then hold the new screw up enough to not stress the cables but not have the new screen stick to the glue As you screw the little screws back into the plates.Be sure once you remove the digital flex cable to be careful with the glued part if glued in addition to how it ofc is connected by the ribbon. These are super delicate. The screws for the ear speaker will be attached to the new screen, not the phone base.Nothing in this process requires force, if it doesn’t pop off easily, check to make the screws are out and it’s properly disconnected, before you go yanking.Pro tip: get a blank piece of paper with scotch tape, fold the tape in small pieces to be double side or grab double sided tape, stick each piece of tape to the paper and number 1-17, (account for the two plates and the SIM card tray) and take mental note if you are removing what screws top to bottom or left to right, place the tiny screw on each piece of tape as you go and even label the paper if you need to buy screw regions so you’ll remember. Then go backwards the left to right or too to bottom you removed the screws. Really helps if you don’t have a sticky mat and works like a charm. These screw drivers are magnetized decent to gets the screws out and back in well.Best of luck!

La pantalla quedó perfecta, viene con las herramientas necesarias para poder remplazar la pantalla, incluye el sello para evitar que se le meta el agua y también una mica de cristal para la pantalla, los colores muy nítidos y de muy buena calidad, súper recomendado

I received everything watch a video on how to do the screen replacement and in about 20 minutes the phone was working properly

No funcionó pésimo!! Lo instalaron y dejo de funcionar a las horas muy mala calidad no lo recomiendo

Presentation wasn’t as fancy as the other brand I tried. That said, the bezel on that one felt so cheap that I’m really glad I returned it and went with this one. Also as a bonus, the price was better on this one too