Deliver to DESERTCART.COM.KW
IFor best experience Get the App
🚀 Elevate Your Data Game!
The cablecc 50cm OCuLink PCIe PCI-Express SFF-8611 8X cable offers high-speed data transfer rates of up to 16Gbps, designed for seamless connectivity between internal devices. With a robust 50cm length and an active latch for secure connections, this cable is perfect for professionals looking to enhance their tech setups.
C**S
Runs at PCI-e gen 4.0 x4 speed!
Beat my expectations. This host adapter is at the heart of my retrofit of an old thunderbolt eGPU into a much faster oculink box. Ran the PCI-e bandwidth tester and verified it was averaging 7.05GB/s (60.6gbit/s). Tried it with 3 different machines (using the m.2 slot on a framework laptop, as well as the on-board oculink slots of both an Aoostar gem12 8845hs and a GPD Win Max 2 8840u). It ran perfectly on all 3. $40 very well spent.
P**H
Works for the Flashstor Gen 2 NAS
Works to attach GPU to get video from my Asustor Flashstor FS6806X NAS.
M**T
Works with PCIe 4.0. No, but really though.
This is no less than the sixth product I've tried looking for a way to run multiple PCIe 4.0 U.2 SSDs from a bifurcated PCIe slot. All of the other products worked fine at 3.0 speeds but would cause a stream of AER logs, resets, and whole-system hangs at 4.0. All of them.Not this one. Four drives, buttery smooth at PCIe 4.0. Gigabytes per second per drive.I used the corresponding Oculink 8i to dual-U.2 cables from the same vendor to connect drives.
H**N
Operating at PCIe 4.0 speeds just fine so far
I did have to 3D print some adapters to let me secure this to the bracket I purchased, but it worked without any issues. I tested both a PCIe 4.0 SSD and GPU. Things have worked at that speed so far.This seems to be a really good value for the PCIe x4 board, Oculink cable, and M2 Oculink adapter.
J**Y
works on linux with open source nvidia drivers
with open source nvidia drivers this worked well on arch linux. with the proprietary drivers, my laptop complained about the bus speed being too high, but this was likely an issue with the framework 13 motherboard than anything.
G**N
Works with an hp eilte desk 800 g4 and a amd rx 580
It was a little fiddly and there were no real instructions. Works only after setting up a second monitor and a reboot. This is really the only way to do an eGPU faster than usb 4 and thunderbolt 4
H**N
Works fine, just makes a crap ton of noise
The M.2 card makes a crap ton of noise, pretty annoying, and if it was near my WIFI card it would probably mess with it. Other than that, it works fine.
C**.
Adds a TON of performance to my ROG Flow x16 2022 with an RX 6700xt!
Y'know it's weird, gpuz says it's only running at pcie 3.0 x4, but the real world performance gains I'm seeing from using it with a used 6700xt i got for 250 instead of my laptops mobile 3060 is craaaaaazy. I can finally play half life Alyx comfortably, and max settings at that, every game I've thrown at it runs at 100fps or more on my ultrawide 1440p monitor with max settings. I bought an open pc case on amazon that interfaced perfectly with the mounting holes on this board and it feels super sturdy. I never could get my gtx 1650 to work with this board (driver issues and many BSoDs) but it was nearly hitchfree using AMD. I just had to disable the igpu, install new drivers from amds website, then re-enable the igpu, absolutely no problems. To cut the hole in my laptops casing I used double sided tape to mark the spot then carefully cut with a dremel. I filled the port with painters tape then filed it down with my dremel so it doesn't stick out too far, worked like a charm!Incredibly satisfying purchase, and i feel like such a giganerd having this thing. JUST DO IT!!
ترست بايلوت
منذ أسبوع
منذ 3 أسابيع