I'm getting an AT2035, I need a way to get the XLR to USB will this mixer work?

AT2035 - that's a condenser mic, right? This mixer has Phantom Power to power the mic (we use a Behringer B-1) so yes. We are using ours to record voiceovers. Mic into XLR, USB to computer.

can you use two karaoke microphones at the same time?

yes, but not recommended or not sounding very good.. the one input slot does take a plug (1/4"; 6.35mm) other than the XLR.. either type is acceptable or interchangeable.. i've tested it with a 1/4" wireless microphone receiver plug and it works fine. . the wireless receiver plug allows two microphones per a receiver unit.

Can the phantom-power in xlr mic-in connection be turned off for microphones that don't require it?

Much the same question as mine. What if you have a USB mic with phantom power. Will that create "overload" if plugged into this interface which supplies its own phantom power?

Even tho condenser mics recommend 48V boost, do you find the Behringer 302 "adequate" to drive a condenser mic?

Haven't used a condenser mic, but here are the specs if it helps:XENYX 302USB MixerMicrophone InputType: XLR/1/4 " combo connector, electronically balancedMic E.I.N. (20 Hz - 20 kHz)- @ 0 Î source resistance -130 dB / -133.1 dB A-weighted- @ 50 Î source resistance -128 dB / -131.5 dB A-weighted- @ 150 Î source resistance -127 dB / -129.8 dB A-weightedFrequency response: ("1 dB) 18 Hz - 40 kHzFrequency response: ("3 dB) < 10 Hz - 75 kHzGain range: +15 dB to +55 dBMax. input level: +12 dBu @ +10 dB GainImpedance: 2 kÎSignal-to-noise ratio: 98 dB / 101 dB A-weighted (0 dBu in @ +22 dB Gain)Distortion (THD+N): 0.013%Frequency Response (Mic In, Main Out)18 Hz - 40 kHz: +0 dB / -1 dB10 Hz - 75 kHz: +0 dB / -3 dBStereo Line InputType: RCA jacks, unbalancedImpedance: 6 kÎGain range: - to +20 dBMax. input level: +20 dBu2-Track InType: RCA jacks, unbalancedImpedance: 20 kÎMax. input level: +20 dBuHeadset Mic InType: 18" TRS mini jackImpedance: 6 kÎMax. input level: +22 dBu @ Gain MinEqualizerLow: 80 Hz / ±15 dBHigh: 12 kHz / ±15 dBMain OutputsType RCA, unbalancedImpedance: 470 ÎMax. output level: +22 dBuPhones OutputType: 18" TRS mini jackMax. output level: +7 dBu / 150 ÎSystem Data (Noise)Main mix @ -, channel fader @ -: -96 dBu / -101 dBu A-weightedMain mix @ 0 dB, Î channel fader @ -: -80 dBu / -85 dBu A-weightedMain mix @ 0 dB, channel fader @ 0 dB: -80 dBu / -85 dBu A-weightedExternal USB Switching Power SupplyMains voltage: 100-240 V, 50/60 HzPower consumption: 0.9 WPower connector: USB, type AUSBConnector: Type BConverter: 16-bitSample Rate: 48 kHzSize/WeightDimensions (H x W x D): 1.8 x 4.5 x 5.4", (46 x 114 x 136 mm)Weight 0.83 lb., (0.38 kg)

Item model number	302USB
Is Discontinued By Manufacturer	No
Color Name	Black
Compatible Devices	Personal Computer
Hardware Interface	USB 2.0
Mixer Channel Quantity	5
Color Screen	No
Power Source	Corded Electric
Voltage	15 Volts

Behringer XENYX 302USB Mixer

التفاصيل

الوصف

المواصفات

لديك سؤال؟ انظر ماذا طلب الآخرون

الأسئلة الشائعة