Nilight - TR-05 2PCS 60 Inch 180 LEDs Bed Strip Kit with Waterproof on/Off Switch Blade Fuse 2-Way Splitter Extension Cable for Cargo, Pickup Truck, SUV, RV, Boat , 2 Years Warranty

I like it Just installed inside sprinter cargo ceiling and man it lights up. Perfect width

Lights are as described. Easy to install and work great. They help my oem cargo lights out. I decided to direct wire these lights to the battery, so I could have them on anytime. Pretty easy to do and so far, so good. Would recommend to anyone looking for more light in their truck bed area.

Replacing a bed light kit I bought years ago from a much cheaper brand. That off-brand kit actually lasted a few years in a covered truck bed, but you can immediately tell this Nilight kit is a step up as soon as you open the box. The wiring feels thicker and more durable, and the kit is put together better overall. I’ve used other Nilight products and know people who run them too, so I felt good taking the chance. Installed this on my 2019 Dodge Ram 1500 and it was easy. It lights up the entire bed with no dead spots, no flickering, and the adhesive stuck well right away. Exactly what I wanted. Wiring was easy as well, and if you have basic knowledge you can get this done!

Installed these on a 2018 Toyota Tundra with an ARE camper shell. Pros: These lights are plenty bright to light up the bed of a truck. No need for a front or rear strip. Just the side strips are plenty. The adhesive they come with seems to be plenty strong. Was doubtful they would stick to the carpet but they seem to be doing fine. Time will tell. Wiring process is pretty straight forward. There’s plenty of extra cable attached to the lights themselves to reach wherever you place the splitter. Seem to be pretty durable. Lights are encased and seem weather resistant. They come with mounting tabs which could be useful if the adhesive isn’t enough. Can’t use when installing on shell tho as it would screw through roof. Cons/Heads Ups: The supplied butt connectors are cheap. If you are using an extension I would purchase heat shrink weather resistant butt splices. The extension wire they supply you with isn’t very long. Maybe 6 feet. For my application I had to run power from the battery so a much much longer extension was needed. The negative is plenty long to reach a ground. They also do not supply any ring splices to connect to battery terminal. The power switch does not have any holes for mounting screws or adhesive attached. Overall these are great lights and are well worth the money. The cons listed aren’t really cons as much as they are a heads up to those wanting to install yourself. I’m a heavy equipment tech so I had everything I needed readily available. Just buy an assorted splice kit, ~50ft~ of wire, electrical tape, and maybe some loom if you’re OCD lol. But I would say any novice DIY’er can do it!

Absolutely love then really lights up your life. Easy to install and everything included.

Worked great. GF does definitely in sprinter van. Used for lighting the cargo area for loading, bought a dimmer switch for adjustment. Worked well and has enough cord for flexible mounting.

So, let me start off by saying I absolutely love being able see in my truck bed now. These lights are more than enough in the darkest night. They even light up the tailgate enough for a makeshift workstation. The reason for only 3 stars is the wiring and the switch. Wiring: the wiring included was not enough to reach to the battery. Luckily I had more and the connectors, so it didn’t cost me anything extra. Also, the wiring for the switch was not long enough for my application. I had to add more wire to place the switch at the back of the tailgate. Perhaps the way I thought best to install it wasn’t the manufactures intent, but my way seemed to make more sense. Button: the first rain that came had the button get slightly wet. Not soaking, but just slightly. The inside of the button corroded and rendered the lights nonworking. I had to take it apart and clean the rust before it would work again. I have since bought a weather proof switch that I anticipate will work much better. All in all, I think it’s a great addition to my truck and I enjoy it, but it wasn’t perfect. If you know basic wiring, you can make this really great.

Edit: I purchased the set of 2 LED light strips to install inside my camper shell on my pickup bed (the lights are overhead). They are SUPER BRIGHT! One light would have been more than bright enough for a pickup with a camper shell (cap) when installed overhead. Wish I'd saved the money and only purchased one strip, but I'm still very pleased with this. They're new, so we'll see how long they last. These lights were very easy to install. I'm a woman and have never added lights to a pickup bed, but this was very straightforward for my teenage son and me. With a camper shell on the pickup bed, it's hard to see without additional lights. This set of two strips is very bright and works perfectly. The extension wire that comes with the set is very thin, and not very long (I think only about six feet or two meters). Would probably work if it were going to be all inside the bed under the camper shell and connected to other lights already in the shell or bed. But my truck doesn't have any other lights installed, so we had to run this under the truck and connect it directly to the battery. I purchased a spool of wire for this. This set also includes a fuse in a fuse holder that is already installed in the wiring for the on/off switch. The extension wire goes from there to the battery or power source. We used 14 ga wire. Probably heavier than needed, but it works. The setup for the lights isn't complicated at all. The adhesive on the back of the lights is strong, but we also used the included brackets to hold them firmly to the camper shell. I purchased another set of three lights exactly like these that we will install in an enclosed cargo trailer using a separate battery inside the trailer. These lights work perfectly and are set a great price. They appear well-made and durable. I considered a set from another company sold for around $10, but they looked so flimsy -- little more than a strip of tape with tiny LED lights attached. I'm happy with the purchase.

Great product, easy install, nice and bright!

Exelente

Super easy install, hooked up to the truck box light wire and is super bright would recommend this product! i will be installing a set of these under my truck doors that will turn on with the exit lighting as well will update with pictures when it is dark to show how bright these are

Se ve de buen material y resistente, viene bien sellado. Le quedó perfecto a la caja de mi Silverado, alumbra excelente espero y dure mucho tiempo. Las tiras las fijé con sinchos ya que con la cinta adhesiva no creo que durará mucho pegada.

I bought these as a gift for my husband since he doesn’t have a cargo light on his truck. He really likes them!! They’re bright and he wired them in with the park lights so even better. Picture doesn’t do brightness justice but so handy to have! Affordable in my opinion and easy to install.