MCMOTOPARTS Black CNC Fork Preload Adjusters Compatible with XJ6N 09-15 XJ600 98-01 WR 125 MT-07 FZ-07

I really like these and they work just fine. A really good cosmetic enhancement and a cheap performance upgrade for the suspension which I personally have no need to further upgrade. Be very careful installing these as they scratch easily as well as the stock one's as well. Easy to install just search on YouTube and use the stock O rings.

O-rings that come with these adjusters are thin garbage. You will have to reuse your OEM o-rings. Adjusters feel light and cheap but so do the stock caps. Can not tell if adjusters were cast or machined. Appears these "Mcmotor" parts extend about 1/4" further down than the factory caps so there already is preload placed on the springs just by installing. Spring compression is noticeable without turning down the adjustment screws. I weigh more than the average rider & I can not imagine increasing the preload more than a few turns. Bike is now extremely stiff, in a way that may not be beneficial to the average rider. Use caution. I will ride for a while at the lowest setting & if I don't like the feel I will go with new springs which was my original plan. These adjusters will not make up for too light of a spring rate. GLB- wrote a helpful review of these parts with pictures.3 stars as long as they hold up. Will update in the future if I have issues.

I have a 2017 FZ-07 and had read about these online. Came across this particular brand and decided to give them a try. Install was easy, just be sure to loosen the allen bolt at the top of the forks before attempting to loosen the stock fork caps. Also, you need to move the o-ring from the stock fork caps over because it's much thicker than the included one. Be careful tightening these up and adjusting your pre-load because these scratch very easy. I knew this going into it and used painters tape but still managed to get some light marks on the pre-load adjusters.Performance wise the big thing I noticed was that it doesn't dive forward so hard when engine braking. I'm no suspension expert so I can't say for sure that it's much better or worse in turns, etc. but just the better engine braking alone was worth it for me. I do feel the bike is overall better handling but, that's just a "noobs" perspective. I feel these are well worth the money.

Amazing product!!! I purchased these after reading multiple reviews. I was skeptic at the slightly smaller specifications of threads but the fit is fine. Just don’t over torque... ride quality is so much better, keeps the nose dive from being so pronounced, and the stiffness slightly raises the front end to reduce the testicle smashing upon braking. For me they are perfect on stock setting ( backed all the way out but still have soo much More adjustment to go. I like these would recommend.... great job guys.

they are great, fit well, work well, and are the best bang for the buk

So far works good. Easy installation and works great. Really does the work! Recommend it. Just carefully turn the knobs without scraping it. Very fragile piece.

Works as advertised.Can be installed without using a stand.(Just have someone give you a hand)

Direct fitment. Works amazing

Works great for my xsr700. I combined it with heavier fork oil and it is much improvement in feel.