AC InfinityAIRPLATE T7, Quiet Cooling Fan System 12" with Thermostat Control, for Home Theater AV Cabinets

Upgraded my under-desk computer system, and it was getting warm under there. This had always been a minor problem in the past, but upgraded CPU and a massive GPU required a way to get the heat the computer was successfully exhausting under the desk, to somewhere else as fast as possible.Just remember that you will absolutely need to cut a hole in the installation surface, at least for the fan. I'm actually 3D designing and printing a simple enclosure for the controller, so it can sit on my desk. It's perfect!I'm very good at tech, but I am not exceptionally handy. Cutting the hole in the back of my desk was a pain. But it was so worth it! With the computer up and idling, I'm seeing a 3-5°C difference with the system in smart mode. Anything below...75°F?...and the fans are off. Automatically! Out of the box, it's set to be at max fans when you reach 85°F, which is perfect for my application. By the time the computer is running hot, the AC Infinity fan system is already in full gear at 100% fans.When the fans are at 100%, because I reversed them (exhaust versus intake), they are a little louder than when they're in the factory stock position (intake). But it's on-par with the 10 fans inside of my PC, so we're good. If they ever release an upgrade to this system, which has more powerful and quieter fans, I'll probably do that.But for now? Perfect!Once I got the fans installed in the desk, and the cables routed where I needed them to be, the system simply "just works."You can set it to Alarm, which is probably fine, but I prefer Smart mode. I do wonder if Alarm is basically Smart but with the Alarm enabled. Might be nice to have a "top end" temperature I can set, where it beeps or something. But I don't want to give up the Smart mode where they turn off.The packaging was awesome, with serial numbers on the outside of the box, so I don't have to remove the installed fan to get the serial number if I ever need it. Everything arrived in perfect condition, with a plastic cover for the controller screen, a fantastic manual, and AWESOME plastic templates for both the controller and the fan unit itself. Made drawing the hole on the desk as easy as tape and a magic marker.I'm VERY picky about the things that I buy, and I have to say that this is like the iPhone of the exhaust fan world. Solid metal fronts, high density plastic backs, and cables that are the perfect length for most applications. I can't imagine a better fan solution for what I needed it for. And, as fans die eventually (did I mention it has dual-bearing fans, which are rated for 67,000 hours!?), I can't wait to eventually buy the next generation of fan system from this company.If you need a way to move air, at 104 CFM, from one place to another, inside a cabinet, or under a desk, as long as you can cut a hole, this is the product for you!

These are incredibly high quality fans and these are almost completely silent. They have a finish that makes you feel like the cabinet came with them. It holds the tempuratures perfectly and as long as you are strategic with them (I've found thats really easy to do in most cases) they work really well, the screen is nice and readable and doesn't light up the room at night (also has a screen-off mode) amd the power draw on them is negligible. The packaging is simple and makes these feel even more premium and they come with templates for easy installation. As seen in my photos they do work on metal cabinets too (though it's difficult to cut and make it look good but I think it turned out nice.)I highly recommend watching some videos on installation to avoid screwing it up and making it look bad.They keep my servers cool to a point where the fans don't run as hard and that saves money there too. I actually use these on my entertainment center to cool my ps5 that's enclosed in there too and it's perfect!This is the high quality brand you're looking for!My ONLY complaint, is the alarm feature is kinda confusing and I'm not sure if the alarm even works at the same time as the fan curve... (edit: it does work. You have to set it in alarm mode then switch it to the desired mode you want)

This thing rocks! I needed something to cool my new home theater rack with a glass door. It is now much warmer inside the unit than the previous "monster" rack I had with open shelves. I looked quite a bit but kept finding all kinds of fans for computers. I needed one like this that didn't need me to wire anything and I could plug into the wall. An added bonus to me is the thermostat controller.I didn't do anything fancy. I just drove a couple of finishing nails into the back of the shelf above my receiver and hung the fan assembly on the nails. The package does come with nice plastic templates to cut precise holes for the fan assembly and the thermostat if you want to mount them in a totally enclosed cabinet. Mine has open shelves in the back, I just wanted to move some air.The USB cord between the fans and the thermostat is long enough that I could place the thermostat controller on the top shelf next to my Monster Power supply with some leftover. The power cord from the thermostat with the little brick or wall mushroom is long enough to make it to the wall outlet with no problem. I set the thermostat controller on the shelf and it looks fine. There is a temperature probe wire attached to it that I hung down the front of the shelves to measure the temperature inside the cabinet.The first time I used it while watching a movie, I was not satisfied with the amount of cooling. Reason, I had the fans blowing into the cabinet over the receiver. This was maybe cooling the receiver like I wanted but it was just blowing a lot of hot air up over the rest of the electronics stack. I pulled the fan housing off the nails, turned it around and hung it back on the nails in the opposite direction to exhaust the hot air off the receiver out the back of the cabinet. That did the trick. I was able to set the temperature down to 76 degrees (my choice for now) and it easily holds that temperature. The temperature probe by the way is hanging just above the receiver. I am confident that it is being cooled like I want now.I've watched 4 or 5 movies since installing this unit and it does not make any perceptible noise when my home theater is blasting away. It maintains the set temperature steady as a rock! I keep it running after I finish watching the movie to allow the unit to cool down after I shut everything down and the fans are very quiet. Then I just have to unplug it from the wall.I am very satisfied. This thing was easy to set up, cools adequately and is quiet. The thermostat controller does have 2 USB ports so that you can add up to two more fans if you need more cooling power. I have had no problems with this quality product. If I do decide I need another fan, I would not hesitate to order another one.