BLUE WORKSPrinted Circuit Board+Display Board Fits for Hayward Aquarite Control Board, PCB Main Circuit Board & PCB Display Board Bundle

We have an approx. 15yo Goldline/Hayward Aquarite system with a t-cell-15.The display and lights are dim and sometimes "fritzes" out (the display freezes and is in a suspended/dimmed phase) and stops generating chlorine. No rhyme or reason when or why. It could be either the display board or the control board. Since the display board is cheaper, figured I'd replace that first to see if it fixes it.Ordered this one (much cheaper than the "Hayward" brand display board) and it took 3 minutes to installl. 1. turn off power to the system. 2. open the inside cover to access the display and control board (2 screws on the sides. 3. pull off display board and 4. install new display board. Buttoned everythign back up and turned it on. The display is clear and the LED lights are much brighter, and it seems to be working well.If this fritzes out liek the previous one, then it's probably the control board that has an issue, but so far this display board works flawlessly on the old control board.

This unit is more expensive than other similar models from other manufacturers. I chose this one because it had several hundred reviews. Anyway, it was easy to install. I followed a YouTube video for installation instructions. It comes with 110-220 jumpers. I kept the Hayward plastic attachment nubs and used them with this board. I had to jiggle the board slightly from side to side so that face cover would fit over the board. It has been functioning for a couple of weeks and so far so good. The units reading are within +|- 100PPM of local pool place water testing.

This item worked great for 1 year, then all of a sudden it quit producing. All lights were indicating production, but no chlorine. Ordered a complete replacement board, and it is cell is now producing visible chlorine coming out the end of the cell. Beware!

Perfect replacement display panel for AquaRite Goldline salt panel. Took 5 minutes to swap out and is working great.

I bought this to replaced the Hayward unit pictured. Unit is made in China but I must say it has excellent installation instructions with accompanying photos - unique in my experience for things made in China. The board seems to be working just fine. When paging thru the windows for temp etc, this unit has two pages more than the Hayward. Not sure what they are or mean and really do not care as all the previous pages are in order and display correctly. I suppose it's configured to accommodate other similar units. Regarding the install - I ended up using all the nylon connectors from the removed Hayward circuit board and display unit. Pictured are the ones removed from this replacement assembly. The stubby ones mount the main circuit board to the control box and didn't secure the board very well onto the metal housing. The bigger stems are at least 1/8" longer than the original Hayward stems and used to mount the display unit to the circuit board. I could not get the face plate of the control box to secure over the display unit because it stuck out too far so I used the original stems and it was just fine. The wiring is very simple and clearly marked, with one exception: the power wires (should be the only two without connectors). Take a picture of your original install before separating the wires. The unit, like the Hayward, can be used with 120v or 220v and this variable is why the power connectors are not marked. Install the lines and jumpers in the same location as the original and you should be fine. Four Stars instead of five due to the nylon connectors - all else is fine.

I bought this for $102 delivered, as well as the main circuit board for $182 delivered; for a total of $284. The pool companies do not do repairs on older equipment and the cost of a new Hayward AquaRite Salt Chlorination system without installation is over $2000. I sent several emails to the seller with pictures and specifications and determined that these parts were what I needed. After watching several YouTube videos and the seller's videos, I was able to replace both parts myself. I am a 75-year-old woman without any mechanical background, so if you are handy and are able to follow instructions, you can do this yourself.

Took 2-3 days to trouble shoot the problem. Without instructions, the installation was time consuming. installing it wasn't hard but the calibration and setup took a while even with customer support being they were outsourced to a different country and was hard to understand them. Still not sure what my salt reading is. They told me the 3.2 I was viewing was equivalent to 3200 salt level, but it hasn't changed but to 3.1 and back to 3.2 in a month. I can't see the salt level not decreasing as time goes on. The instructions they told me to change it to the 3200 didn't work. I pretty much had to figure things on my own for troubleshooting. The only reason I gave them a 3 was because they were good about calling back and trying to fix the issues even though their advice didn't always work.

I gave a 3 star for TECH Support because I don't know how good they are? I did not need to talk with them or ask for any help at all easy to remove and replace!!!