Evolution 14BLADESS | 14" 90T Stainless Steel Blade | TCT Saw Blade for Evolution S14CPS, S15CPS, S355MCS, S355CPSL | 1" Arbor | Max 1600 RPM | Precision Stainless Steel Cutting for Metalworking

Almost no sparks cutting mild steel pipe and flat. After cutting a 2" steel pipe, a 1" galvanized steel pipe and 4 -2" X 1/8" flat steel at proper speed, no coolant, the blade was cool to the touch. Amazing. I'm using it in my Harbor freight 15" cutoff saw instead of the fiber cut-off wheels. It has a good speed clamp to keep work secure. So with this blade there is no discernible vibration and much less noise than a fiber wheel. Nice flat, straight cuts. much better than a fiber cut-off wheel for speed and accuracy. 1" arbor hole in blade, but comes with a washer to fit a smaller arbor. I didn't measure it since I didn't need it. Highly recommended over Diablo steel blades for lack of heat and keeping sharp and almost no sparks. Pay the small increase in price over Diablo. It is well worth it. You may incur a return shipping charge, but you won't be returning it for lack of quality.

cuts well doesn't clog

I originally had a 42 or 44 tooth saw, but this saw is...IMO...light years better. Almost no sparks and it cuts very clean and smooth with not nearly as much cutting noise as the lesser tooth saw I was using. Very happy with this saw and highly recommend it for your DIY projects or even if you are a professional.

These are "low" rpm blades. Using them in a standard circular saw "skill saw" they will not last or preform well. I uses these in my 7 1/4 Evolution metal cutting circular saw and they preform and last GREAT cutting all forms of mild steel for general fabrication off 3/16 plate to 1/2 flat bar. since i have owned the saw i have used 3 blades, and i'm confident that the amount of 4 1/2 inch cut off wheels would easily exceed the cost of the 3 blades to do what i have done so far. not to mention how fast,clean,dust, and spark free the cutting is it has saved tons of time cutting, cleaning up after a project is complete. I've not tried other brands of replacement blades as I'm satisfied with these.

I bought an Evolution saw, the best one I could get for my fabrication business, and went ahead and ordered this stainless blade since i do ALOT of work with stainless. First blade I got I thought it couldn't get any better than this. Left nice cuts that needed minimal cleanup. Quick and cool. I did about 25 cuts through 1/4" thick 1.5 x1.5 stainless angle. Was satisfied up until that point. Moved over to another job where I was cutting 2.5" stainless tubing for an exhaust, and I caught the blade at a weird angle and pretty much impacted the teeth on the material. Chipped a lot of the teeth, so I went ahead and ordered the blade since it was my fault I killed the blade. Second blade started off like the first, but got only lasted about 10 cuts through 16 gauge (.065"), 2.5" OD stainless tube before the blade would no longer cut. Had to put a lot of pressure on the saw to get though cuts and it was pretty much like using an abrasive saw. Was pretty disappointed but went ahead and ordered another since I still had jobs lined up I needed to get done. The third blade only lasted through 3 cuts before it no longer went through the tubing. 3 CUTS!!! Will no longer be ordering this blade, IDK if they switched manufactures, but this blade is complete garbage!!

When I received this blade it cut like butter. I was using it on a chop saw that runs about 3600 rpm. after 20 or so cuts on mild steel, the blade went dull, and fast. I decided the speed was too fast and ordered the Evolution saw that runs about 1800 rpm. With a new blade and a lower rpm, the new blade is lasting much longer.

Worked really well. I used my cheap Ryobi circular saw. I cut about 16 feet of 3/16 plate steel before the blade stopped working.

Very good quality and price; in fact, I looked at other suppliers and this one was the most affordable.

Excellent

ok

Découpe aluminium, précision et pas échauffement. Je recommande

Aún no la he usado, pero se ve bien, en cuanto la use actualizare opinión

Evolution Power Tools verspricht nicht zu viel bei dem was das Sägeblatt können soll. Ich habe damit mehrere Flacheisen 40 x 6 mm und Vierkantrohre 40 x 40 x 2 mm gesägt. Ich nutze das Blatt mit einer Evolution R210SMS Kappsäge und die Ergebnisse sind perfekt. Standzeit wird sich noch zeigen aber nach dem ersten Dauereinsatz sehe ich da keine Probleme.