APX2502

Purchased this rack for putting a rooftop tent on my 03 Tacoma step side (overland build). Since my truck has an odd-ball size (non-standard width due to the step side), I had to use a universal rack. This one wasn't crazy expensive, was pretty sturdy, and could fit multiple sized beds. Setup was fairly easy. There were good instructions. It uses a clamp based system that works well. My only thought is that the metal pads for the supports are big, so for my smaller truck, there is some overlap. I am sure they were gearing this more for mid to full-size trucks, but it does work on mine ok as well. There is just some overlap, and I centered them as best as I could. If you are looking to put something like a RTT on it, you may need longer bolts. My tent (Tuff-Stuff Ranger) came with 2" connecting bolts, and I could get them to work, but barely...it scared me enough to go buy 2.5" galvanized bolts to have extra threads to work with. Also, the bottom plate that helps hold the tent on had to be longer. This is due to the spreader bars being pretty thick and wide, so some rack & tent installs may be a bit tricky. It ended up costing me about $20 in parts for my tent, and most box stores (or Amazon) have the extra parts. I like the fact that the bars are a bit bigger/sturdier, as the static load for this rack is 800 lbs (many are not as high). Just the tent alone is almost 140 lbs, and then you put a few hundred pounds extra of people, and other items as well, and it adds up quick. It's a beefy rack, and I don't think there should be any issues with load. Also, it was just high enough that it didn't block my rear view...I can see some of it, but not enough that I cannot tell who is behind me, or block me in seeing as I back up. It does leave the tent up in the wind stream some, so will have to do some fairing work with that. Quality control is good - powder coat was done well, no major scratches. It got banged up a bit from shipping, but nothing that to me was returnable. The other nice thing is that if my truck dies and I get a new one, I can most likely just move it to whatever new truck I get. It also comes with load brackets that keep loads from shifting, good end caps, and weather stripping. It did not make any extra whistling or anything after it was installed. All in all, satisfied with this rack. Has not caused any issues, and seems to be holding up well.

I wanted something adjustable and low profile for a 2020 Jeep Gladiator since the cab isn't as tall as other trucks and the bed is definitely smaller. All the other reviews showed it mounted on larger trucks, but I decided to give it a try. This rack is great, the adjustable posts are perfect and keep it below the cab height when not in use. It adjusts easily with one person and was easy to install by myself. Once everything is assembled and tightened, it's very sturdy. One of the questions answered above states that the crossbar is adjustable. The bar itself is not adjustable and cannot be made longer or shorter, but its position on the posts is adjustable so it will fit any bed. For reference, the crossbar extends 6" beyond the post on each side in my photos. A wider bed will just have less crossbar extending beyond the post. Width of the Gladiator is similar to a Toyota Tacoma. The bed is 5' long and the kayak in my photos is 14'. The tie-down hooks are really handy and I like that they're also adjustable along the crossbar or can be removed if needed. I love Jeep and needed a truck, and the short bed on the Gladiator was my one hesitancy, but this rack solves that problem entirely. Overall a great purchase!

Easy install with these racks. Wasn’t sure if they would fit my 2023 Toyota Tacoma short bed from the description and reviews but they fit perfectly. They come with standard C clamps and you’ll want to order in addition their cap clamps that will work with the Tacoma utility rails. Nice and sturdy racks and feel like good quality. The top rail portions had a few small dents from shipping but not a big deal and can barely see. They were packaged with just plastic sleeves and maybe some bubble wrap/padding would protect those while shipping. Would highly recommend if you want some quality racks for the best price over the big names.

Overall works good for my use of hauling a Thule box full of skis. Compared to what the big guys charge for a similar product it is a good value but I don't know how they justify the prices for a pretty basic item. Anyway... I would put this in a 5 star especially for the price but the knocks I have are pretty big. Here are the goods and bads. Goods: As stated above, good price for what you get compared to other big name products. Easy to assemble. Seems reasonably good quality Bads: The clamps are cut from plate material instead of cast which is not a biggie as they seem strong enough but I did spend about 30 minutes with a file getting the rough burs and edges off of them. Not sure if they product test this very much. Biggest issue is the length of the plate that sits on the bed rail is to short. Even with flexibility of placement with the Thule box adjustable clamps I fought this around the bed ribs where I needed to place it. I ended up having to shift it forward which means the box was rubbing the back window a bit and also grind part of the clamps away to allow it to get enough bite on the plate. If they would just add 1" each side (or 2" total length) to each of those plates it would take care of that. I drive an F-150 so not like its a weird bed layout. exact opposite as it is the most common. Minor but other reviews noted the finish coming off. After 1 trip I have some issues at edges but it does not bother me. Not sure why they finish it at all unless the extrusion is not quality enough to leave as a clear finish? Country of origin - Manufactured in China Overall - I would recommend it but if the manufacturer is paying attention here, give us a bit longer plate on the bed and watch QC on the clamps before sending.

This truck rack is solid and well engineered. Assembly is very simple and takes about 30 minutes to construct and attach to a truck. Materials are top notch and provide for easy alignment of the top rails. The only downfall on this rack is the rubber weatherstrip’s that are provided for the top of the rails. Although the bottom weather strips fit nicely when cut to fit in the channels under the rails, the top channel cannot take the rubber weather strips because of the sliding anchors used to tie down objects when traveling. The channels must be left open in order to slide the anchors that are used to tie down gear. While this isn’t a big issue, it does allow water to get into the channels which may cause some rusting problems down the road. If you’re going to leave to anchors stationary, and not move them, the rubber weather strips can be installed and you have a semi tight channel that will resist water. Overall a good purchase!

Took less than an hour to put together, and the feel and look high quality. I have high end Yakima racks on my SUV and I like these better for a truck. Super sturdy and they look and feel substantial. I chose the longer bars since I have an old truck with a full size bed. I probably could've gone shorter, because the bars are adjustable (you can attach items to them) up until the end of the bars. Mine sits in the truck bed with a 150 lb tent on it. Other than seeing it back there, it would be hard to tell it's there. No movement, rattles, shaking, or noise at highway speed.

This rack installed easily on my Jeep pickup, which has a very small bed. I was a little concerned about the clamps that hold the rack to the bed, but opted not to drill and bolt. That was a good decision. The rack is solid and I've encountered no problems since installation. The adjustable racks were a requirement for me because I wanted to be able to haul my canoe upside down. By raising the front and lowering the rear, I now have clearance between the boat bow and the top of the truck. This rack is well designed and a high quality product. I'd buy it again in a heartbeat.

Easy to assemble and install. I was looking for something black for a new black pick-up I recently bought. I had a steel powder coated rock on my previous truck which rusted and left streaks down the white paint so I was looking for something aluminum and this fit the bill. Not only does it look great I like that when I'm not carrying the ladder it is adjustable and lowers behind the cab. After having it a couple months I noticed an end cap missing off one of the top rails. I must not have had the tie down adjustment knob tightened all the way and when it shifted it popped off the cap. I contacted customer service to inquire about purchasing a replacement and they responded promptly and sent new piece at no charge! Hard to top customer service like that. Definitely recommend!