Gentex 50-GENK2AM Auto-Dimming Rear View Mirror by Gentex

I recently bought a 2012 Toyota Prius that was missing it's mirror but still had the mount glued to the windshield. This mirror worked perfectly with the existing mount, all that is required is a Torx bit to secure a set screw. This also upgraded the vehicle to have auto-dimming, so I had to install the wiring. Luckily it is as simple as buying a Low-Profile Mini Fuse tap, crimping it to the 12V power line for the mirror, plugging the tap into the cigarette lighter outlet in the fuse panel, and running the wire up the A-pillar underneath the plastic trim. I had it completely installed in less than an hour.

First off, the actual product. I'm a hard critic when it comes to aftermarket products. I want the best for the return. Not cheap, but 'what you pay is what you get'. This is worth the $$. Found myself playing around while driving enjoying the difference and how much it helps. I live in Brooklyn and driving the BQE every night, its gets exhausting flipping my mirror to see traffic and then flipping again to tone it down. Installation. Okay for me, it was a process. I own a 2000 Honda CRV, so the OEM mirror mount is in the roof, not the windshield Mount: I had to mount a new metal bracket on the glass to hold the mirror. First off, buy the 3 pack of metal mounts. DO NOT USE plastic. It's not easy to mount to glass. I ended up making my own (work in a fabrication shop) to save time waiting for the mount. In terms of glue, stay away from epoxys, caulk, 5-minute adhesives, yada yada yada! It all takes time to cure only to find out it might not hold. You want UV Glue! It dries fast, and holds strong! I work with NYC Museums, Calvin Klein Fashion Exhibits, so trust me. If it holds for them, it'll hold for you! This stuff is great; https://www.amazon.com/CRL-UV702-High-Viscosity-Adhesive/dp/B006JFKP3W. It has a shelf life of 18 months after production. It's toxic, so wear a respirator. Don't forget the UV Light source, amazon has a bunch of flashlights, again need glasses, or just don't stare directly at it. Mark your window from the outside where you want the mount. Wipe the inside window and your mount down with any kind of stripper like acetone, denatured, rubbing alcohol. Apply a thin amount of UV Glue to your mount. Press it against the window. Tape it into place. Look outside and make sure the glue covered the whole area between the window and mount. Put the light source right on outside and shine down on your glue for a minimum 5 minutes, at most 10 minutes. Once hardened, its not going anywhere! Wiring: Okay this was a bit of a challenge, I could tap into my radio, but it's a headache getting it out. The easiest thing to tap into for me was the window adjustment control. It normally just pops out! Disconnect the harness and feed that down to below your steering wheel. You'll need a multimeter, wire strippers (at least 20 gauge) , crimps and crimpers. Don't use the splice connects they give you. Not safe and will fail eventually. Could buy this set, https://www.amazon.com/EL-SKY-Terminal-Connectors-Assorted-Electrical/dp/B01LA82M8S. It'll last you awhile. Use the red butt crimps. Check the wires until you find a 12v source. Should only be one. Clip, strip, crimp, plug it back again. Done.

Direct swap for mirror on jeep Cherokee XJ. Dimming feature works great. Very easy installation, just need to route power from a convenient nearby source.

Wasn't sure if it would fit a toyota hilux 2012 , but I'm amazed is it fits like factory, I'm yet to test the dimming feature at night, I'll give an update on it

I don't know if this mirror works but it will NOT INSTALL in a ACURA 1999 3.2 TL as a direct replacement. It would need some wiring adaptation and the mirror mounting is not compatible with the original bracket glued on the front windshield. This may be a good mirror but it just don't fit. I never used it, just returned it with no problem returning it.

For those installing this to replace a standard mirror and they own a 2019 XLT base Explorer, read on. First, the mirror looks good and I doubt most will be able to tell it's not stock. Second, installation is easy, if you know the color codes on your wires of the map lights. I didnt. O.o I finally got it, but let's just say just because a wire has green on it, does not necessarily make it a ground. Last, instructions. 1) Use a flat head screwdriver and insert at the base of the old mirror where it mates to the window. Pry out as you pull up on the mirror. If in doubt, google it. There are plenty of videos showing you how to do this. 2) Pull down on the sunglass/map light assembly gently. It will pull right out and unplug the wire from the lights. Set the assembly aside. 3) Get a machine screw with a head big enough to not pass thru the ground wire loop on the wiring for the new mirror. This will be your ground. 4) Get a drill and drill bit for drilling a hole for the ground screw. Use the minor diameter size for your drill bit for the screw size you are using. 5) Drill into the metal plate attached to the roof in the sunglass/map light cavity. Making sure it is NOT the roof of the car. Double check the distance between the plate and the roof. I had about two inches. Make sure your ground screw is not too long to inadvertently pierce the roof. That would be bad. 6) Install ground screw and wire. 7) Attach the red IDC clip to the yellow and green wire. 8) Push the clip of the other wire for the mirror into the back of the IDC clip. 9) Feed wires thru opening in cavity against windshield. 10) Zip tie excess neatly. Or cut and splice. 11) Plug wires into back of mirror. 12) Slide mirror into position on windshield and tighten the torx set screw. 13) Start car. Green light should be on in the front of the mirror. 14) Test by covering the sensor on the back of the mirror. It should dim. 15) Reinstall the sunglass/map light assembly. Make sure you plug the lights in. You should be done

純正ミラーから交換。 これを装着するだけで、クルマの室内の高級感が増しますし、実際の性能としても、夜間の高速走行が楽になりました。 自動車メーカーは、これを全車種に装着すべきでは？ 事故も減るはずです。

Cumple con los que dice la descripción

Belle qualité mais le bras articulé est trop court

The mirror was a good buy, did exactly what it’s supposed too.

Works exactly as described. Just needed to order the proper piece to attach it to the windshield.