Schumacher Electric Replacement Battery Clamps with Color-Coded Grips, BAF-C50, 50 Amps, Red for Positive and Black for Negative, One-Year Limited Warranty, Copper, 1 Set

Smaller than I expected but still good quality and works great on my 2/20/50 amp battery charger. Needed to replace the original clamps because the wires were beginning to loosen in the handle of the clamp and come loose. These were the answer and thank goodness, now able to keep my little battery charger in use when necessary. Highly recommend.

Exactly what I ordered durability is so there size was perfect clamp quality was amazing grip was amazing thickness was there ease of installation was there

One of the clamps on my Schumacher XC130 fell off (not sure how that happened) but I bought this to replace. It was easy to install but the clamp was smaller than I expected and is smaller than the clamps that were on the device. These look like copper/copper clad, and the original were not copper. Hopefully these last a while.

Clips are just the same as original. Happy with the purchase.

I have used some of these to make high current jumper wires for testing automotive/RV systems. However I have a different use for these. When making voltage measurements around batteries, inverters and chargers using thick cables I am not always able to connect my small voltmeter alligator clips to the large connectors. I keep two of these handy to connect to the large power connectors and then connect the small alligator clips to the back of these clips. The voltmeter connections stay in place and my hands are free to flip switches or tighten/loosen things while troubleshooting.

I used a soldering gun to solder the cables to the clamps. As you can see, my cables aren’t sized for 50-amps (my power supply puts out only about 6 amps) so the crimp holding the insulation is a little too large. But it still holds just fine - in my application there’s not a lot of force on the cables.

These are supposed to be replacement clamps for a Schumacher battery charger. However they are only about half the sizes the ones needing replacement on my Schumacher charger. They won't accept an 8 AWG cable and even a 10 AWG would be pushing its limits. Nice solid copper clamps for maybe a trickle charger.

Awesome... they do just what they're supposed to do... go figure... ha