AC Flush Kit with Stainless Steel Canister for Car AC Systems | AC Flush Tool Kit, Solvent Not Included, Stainless Steel Canister, Air Powered Cleaning, Professional AC Service

Sturdy construction, solid stainless steel solvent container. Pressure gauge and nozzle seem to work fairly well, held pressure with no issues. Shut off valve didn't fully shut off, but this wasn't an issue as the expectation is this is connected full-time to shop air to fully flush solvent through system. Used with heptane/alcohol solvent with no issues. Capacity of flushing contain isn't huge, but was able to fully flush condenser on 134a system in two 'fills' - I went through about 3 quarts of flushing solvent to fully clear out residues from condenser and evaporator. Refilling was super easy, just unscrew the top valve/gauge from the main bottle, fill and flush. Got this at around $28 - which was almost 1/2 of other alternatives and arrived by 7am allowing me to finish the A/C system job. This was the best price I found for this system.

Great flushing tool! Don't know how I ever did without it!

Works fine, but could use a fluid regulator. It will flush out the fluid so fast, and seems like it wastes a lot of fluid. But it does the job.

I was not sure how much fluid it put out. Meaning is it a spray, or no air and all fluid. It is all fluid under whatever pressure you feed it. It does not take long to completely empty the tank. I had purchased two 32 oz cans of ac cleaning fluid. The first one I used completely on just cleaning the condenser. It appears to have taken the oil out of the condenser. Needed to go back and get two more cans of cleaner to finish evaporator, and hoses. Beware of where the exiting fluid is going. Meaning make sure you are wearing proper gloves, and eye protection. When I cleaned the condenser I placed it laying flat on a box. Then I put a large drain pan under the tube where the fluid would exit. It really blasts out. I had the pressure set at 65 psi. The next time I do this I am putting a hose over the exit tube, then putting the hose into a gallon plastic milk jug.

Good product Good price

Why did you pick this product vs others?: I own a 1993 Ford F-150 and had an AC issue that led me to converting system from R12 to R134a. I certainly wanted R12 mostly to make things easier, it cools far better and the OEM components were made to accommodate R12 and not R134a, so it's not as efficient. The issue I had was that the desiccant in the accumulator/dryer broke apart and clogged the orifice tube. I was sure that some of it found its way to other components throughout the system. I rented a compressor from one of the big box home stores, purchased several courts of AC flush, and finally, this unit to connect to the compressor so that the flush is forced out under high pressure. I replaced the compressor just to be safe so I don't have to clean it, so I focused my energy on the lines, condenser and evaporator. It's a messy job no matter how hard you try to make it not so. You're refilling bottles, changing from bottle to air nozzle, it's just a mess. Luckily, the cleaner is essentially just that, a cleaner with a citrus smell so it's easy enough to rinse off if you want, or just let it evaporate. The Four Uncles tool isn’t absolute necessity if you intend to flush components, but it no doubt improves the results. I flushed the evaporator so many times and re-used some of the flush after it's settled. I was much more concerned about the desiccant versus oils or anything like that. I may have to break the system open again and replace the orifice to again, as it should trap any remaining desiccant within this system. For now, it's working as well as can be expected. Pressures are where they need to be, but it definitely does not cool as well as the R12 well did. If I notice any fall off or other issues that will expedite breaking the system open again. Depending on what I find, I may use this tool again to perform another flush.

Please read my review to the end where I made an important statement concerning the corrections of imperfections that my unit had. This unit is well built but the one that I received had a very faulty high pressure safety valve. The hole in the brass casting was drilled undersized which did not allow the round nose of the piece that the o-ring seal is mounted on to seat against the casting. Air rushed out of the safety valve regardless of the pressure that was applied to the tank. By drilling out the hole in the brass casting a little larger, using numbered drills, the seal ring was able to make correct contact and make a good seal. After the correction, adjusting the correct opening pressure was a simple task. The other imperfection was that the enclosed quick connect US adaptor had a mounting thread that was too small in diameter which required the use of heavy duty industrial gas line teflon tape in order to get it to seal. I still had to replace the adaptor because it would not create a seal with my female connectors on the ends of my air lines. With the exception of these correctable problems, the unit is of good quality and worked great. UPDATE: On 3-30-2023, I have been assured by the manufacturer of this product that they have corrected the issues that I found to be a problem. In light of this, I am changing my rating to 5 stars because the product is very a well engineered item and should work well now that the issues have been corrected.

Great AC Flush Kit

届いてからしばらく使う機会がなかったが、自社の車に使用しました。 汚れもとれ、以前より冷えるようになりました。 某メーカーとほぼ同じ物ですね。

エアーソケットが3/8しか無い為に日本国内のエアーツールは1/4のソケットを購入して付けました。 販売説明に記載は無いのと国産メーカーじゃないエアーツールソケットは大半が3/8の可能性が高いので注意しましょう