Neatfi XL Bifocal LED Magnifying Lamp, 7-Inch Acrylic Lens, 5D/20D Magnification, Hands-Free, Dimmable, 84 SMD LED, Adjustable Arm for Crafts, Reading, Close Work (Black, with Clamp)

Pros:Very bright even 5k lightDimmableVery large clear lens.Diopter is a useful +Stays very cool during use.Appears to be very well made.Lens is removable so diopter can be rotated to a "best" locationCons:Plastic lens – at north of $115 USD – lens should be glass – over time this “acrylic” lens may develop scratches after repeated cleanings. It is, of course, much lighter.Off switch needs to be toggled four times to turn light off from full bright. A second just on/off switch should have been provided next to single switch (or a right left toggle with two funtions). Blending the dimmer settings, on and off into just one switch is annoying. And switch should be above not under LED ring.One click does NOT turns light on to previous setting.Lamp cannot be swiveled in any needed 360º configuration. Some needed adjustments are not possible. Had to attach arm directly horizontally to my side – could not attach arm on tableside further in front of me. Otherwise lens remains at an angle when viewing through.The hand tightening four-armed adjuster is made of plastic – needs a LOT of pressure to keep the lens up and horizontal. I think that over-time this bit may break - seriously limiting this lamps use

I'm pretty happy with it. The view port is big and the light is bright. The only thing that I think is annoying is that the light has multiple dimmer settings and the power switch does double duty as both the on/off switch as well as the dimmer switch; and so what that means is that if you want to turn off the light you have to cycle through all of the dimmer settings. This is kind of annoying. I think the dimmer settings are not valuable. I cant imagine a use case where I would not want the light on the highest setting. Rather than a dimmer switch it would be nice to have a dustcover over the magnifying lens on a hinge that can be flipped down when not in use.

Wow. I really like this lamp/magnifier. My last one lasted about 15 years. Last week it blew apart. I had springs, bolts, nuts and washers all over the place. I saw one just like my old one but decided to look for a newer model. This new one has led lights that are really bright. The lamp has four brightness levels. It has a really large and really clear magnifying lens. It seems to be extremely well made. It should last for a long time. I like the fact that the light stays parallel to the desktop when you move the arm around. The arm moves around very easily. I really can’t think of anything bad to say about it. When I took it out of the box and picked it up and saw it, I said Wow! I then mounted it to my desk and turned it on and this time I really said WOW! I’m telling you the lens is big and very clear and the lights are very bright. This is just what my tired old eyes needed.

I wanted a magnifying light for projects and repairs. I chose this one because it had the largest lens. This unit is ok with some caveats.1) the light head is extremely difficult to adjust. You have to loosen/tighten the friction knob to move the light to the position you want and then lock it in place. The whole head will just flop down if you loosen it too much, possibly flopping into your workpiece. The articulating are seems good and holds position well. No complaints.2) I wanted an LED light because halogen is hot and I don’t like the flicker I’ve seen with fluorescent. The brightness of this unit is ok, but I wish it were brighter. You click the on switch and the unit comes on full brightness. Click it again and it dims a bit. I think there are 4 brightness levels before it goes off. The adjustment is kind of useless. I’d prefer straight on off.3) the big lens is acrylic plastic. This means it’s lightweight, scratches easily and has chromatic aberration (colored edges on things when you look thru the lens). I knew this when I bought the lamp, so I’m not disappointed by it. It’s a decent cost/weight trade off. It definitely does the magnifying job well and I’m satisfied.All in all I think I like this. It’s a bit clumsy to adjust and not as bright as i might like. But it doesn’t cost $400 either. I have it up in my office work table. I may buy another one for the garage after I’ve used this one for a while.I recommend this light even with the couple of bugs I mentioned.

Good looking and very easy to mount on my desk, sits out of the way. 5 Diopter lens size just under 7" at ~ 6-13/16" and 20 Diopter lens roughly 1-7/16". Sufficiently bright at highest setting. Positioning the swivel head is not as smooth as I expected, but its very functional...plus I've only had it a few days so maybe I just need to use it more. The base swivel is much smoother than I expected, thin design, and sturdy. The large lens is nice and I also like the power cord disconnect at the swivel location for easy transport. After going through many reviews and varying models, I'm happy with this choice.

Love itPutting puzzles togetherFixing eye glassesMakes a wonderful light for seeing things.

The magnifying lamp was much stouter than the one I had, the light has three or four different shades of light. I love it. The price is worth every penny. Get one you will love it.

Estable, muy adaptable por los movimientos que permite y con muy buena liz

Works well. Lense is very clear, no distorsions. Light is sufficient, just right. Brightness setting is memorised, just press button twice to put off. It stays put where you left it and the angle of the lense is kept when you move it up and down. Very pleased with my purchase. Better than the one I have at work.

Ich habe die Leuchtlupe hauptsächlich für die Fehlersuche auf Platinen angeschafft. Leiterbahnrisse und Hitzeschäden sind endlich leicht zu entdecken. Die Lichtstärke ist in mehreren Stufen einstellbar. Die Tischbefestigung ist stabil. Ein rundum guter Kauf.

Es un producto bastante bueno, el problema es que para apagar la lámpara el interruptor recorre todos los grados de intensidad hasta cero, es incómodo y se fatiga demasiado el interruptor. Deberían de agregar un paso de apagado directo de la lámpara.Por lo demás es bastante bu producto.

it's a bit pricey ($ 206 total) but I got tired of my dollar store mickey mouse magnifying glass so I swallowed the price of this one - and it was worth it. This bench top magnifiying glass dominates a viewing area 7 inches in diameter; AND has a 3 step brightness level LED light which illuminates the work area perfectly - this is perfect for electronic prototyping ( I do Arduino/Elegoo projects) and this helps a lot. It was worth it.