C1000 Krystal Clear Cartridge Filter Pump for Above Ground Pools: 1000 GPH Pump Flow Rate – Improved Circulation and Filtration – Easy Installation – Improved Water Clarity – Easy-to-Clean

The Filter Pump I got with the iPool was (as many reviewers have said)a joke. You could barley feel any water flow in the inlet and outlets of the pool. But thanks to upgrading to the Intex 56637EG, the water flow is more like a real filter pump should be and is very strong. I am a bit confused as to why someone would buy the 56637E without a fault breaker for more money, but to each his/her own. This is a very strong pump, but I have ordered a second as back up. Oh yeah, one more thing, when cleaning the (A) filter, you can actually remove the filter with the pump running, but not with the pump off because when the pump is running, water will only enter at the bottom of the filter well; when the pump is off, pressure from the pool, forces the filter well to fill up. Also, when cleaning the filter, it may look clean (white) but don't let that fool you, as most of the sediment is trapped in the inside folds of the filter where you can't see it; just spray off the filter and out comes brown stuff you would never see by just looking at the filter. Addendum: After running this pump/filter for two seasons (my seasons are about 8 months long as I live in the desert) for an average of 6 to 8 hours a day, I can say this is a very strong pump and I have had no problems with it. Something else I have learned about the filters, is that you don't need a bunch of them, as I have been running off the same filter for the two years, I just unscrew the top as the unit is running, spray off the filter, put it back in, close the lid (not to tight), turn off the power, unscrew the air vent and let all the trapped air out, and then start up the pump again. Addendum 1: I have been using this Pump/Filter for over three years now with NO PROBLEMS. Intex has a new number for this Pump/Filter; it is: 28637EG Addendum 2: This is the start of the 4th year on this pump. I ran the pump for a few days, and I noticed the GFI was tripping, after four or five restarts, the pump impeller started to make an uneven sound, and then it just stopped. I will use the back up pump I have, and have ordered another back up. At $45.00, three years of service is acceptable. I disassembled the bad unit, and the impeller had no damage, so the motor windings (potted) went out. I pulled the impeller and plastic coated magnet (all one unit) out, and anything else I could use for spare parts, and installed the new pump. Also, at minimum before you toss the old unit, clip the extension cord and GFI plug, as the 25ft cord and plug are worth about half what you are spending on the whole pump!

The INTEX C1000 Krystal Clear Cartridge Filter Pump has been a fantastic addition to my above-ground pool setup. With a pump flow rate of 1000 GPH, it significantly improves circulation and filtration, ensuring the water remains crystal clear and inviting. The difference in water clarity since installing this pump is remarkable, making swimming much more enjoyable.Installation was straightforward and hassle-free, thanks to the clear instructions provided. The pump is designed for easy maintenance, with a cartridge that is simple to clean or replace when needed. This convenience saves time and effort, allowing me to focus more on enjoying the pool rather than maintaining it.Overall, the INTEX C1000 filter pump delivers excellent performance and reliability at a great value. It's an essential upgrade for anyone looking to enhance their pool's cleanliness and efficiency. Highly recommended for its ease of use and effective results!

We don't have an actual swimming pool, but bought a new 300 gallon Horse tank we bought for a cooling down pool, fits to good size adults just fine, with 3 feet of water. Got a few colored LED lights up, a little Tiki like set up, all done on a very cheap budget. tired of draining every day, even though we are in the country on our own well. Bought this seeing it is just a simple pump with a filter, and we have no pool holes and we did not want to cut into the galvanized tank. With a weight to keep the siphon hose down in the water, which we draped over the rim and goes then into the filter, and a simple cheap "c" clamp for the return draped over the rim of the round tank as well. We then primed the pumpby taking off the lid of pump, filled it with water, filled hoses best we could by dipping in pool, turned it on and works perfectly. Timer works perfectly. ran it 3 times for 4 hours each,pool is crystal clear, very nice. The suction is very good, blows water out with good force. going to make a removable board to affix hoses to, so we can simply slid it in or lift out, it will clip for the rim. When done for season, lean tank up against shed and put pump in shed, all good till next year. Well worth the money, works very good.

Excelente compra

This pump recycles the water in our 14 ft swimming pool very efficiently, especially with the skimmer attached. The suction allows the skimmer accessory effectively clean the surface water, while the pump filters the rest of the water. Regular, weekly washing of the filter will ensure water stays very clear.

Worked perfectly for my intex pool. When I changed the filter for the first time I was shocked at how dirty the filter was. It was easily to install, easy to use and was able to clean my pool in 4-6 hours.

After ordering, advised to buy a step down converter. The one I bought wasnt suitable. Needed 2kw and cost 7.5k. Too much expense.

Never worked!!