Supershieldz (3 Pack) Designed for Samsung Galaxy Tab A 8.0 (2019) (SM-T290 Model only) Screen Protector, High Definition Clear Shield (PET)

Love it!

None of these screen protectors are perfect, but this one is better than most. To install the protector, you need to be on a flat surface, like a table, in as dust-free an area as possible. Then you need to take your time and slowly peel back layer #1 while using the card to push out bubbles. You will need to push them out multiple times as you continue to peel back layer #1. Once layer #1 is completely installed, continue to push out little bubbles along the edges until you are satisfied and ten remove Layer #2. It still won't be perfect, but I ended up with just a few little bubbles along the edge. I also had one hooked shaped bubble at the top, that I never could get out. If it ends up bothering me a lot, I will replace it with one of the other protectors that come in this pack. All in all, it took me about 10 minutes to really get this looking good. Now that it is on, it appears to be able to do what it is supposed to.

What it includes: 3 screen protectors, 1 dust cloth, and 1 cardboard squeegee.Each screen protector comes sandwiched between two protective sheets that are numbered in order of removal (#1 exposes bottom adhesive side and #2 simply protects the top during installation). Supershieldz recommends watching their installation video on their website, which does helpfully show how to prepare the screen and deal with a dust particle trapped after installation. I’ve used this screen protector brand before for a Samsung phone and have had good results. Lacking in this kit (which the smartphone kit had) is an alignment process, which makes installation much less aggravating. However, a simple strip of masking tape works nearly as well. Before removing the #1 protective sheet (adhesive side), align the shield protector where you want it, making sure the adhesive layer is face down (facing the screen). On the side that has the protective sheet pull tabs, apply a strip of masking tape so that about half is on the screen protector and the other half is able to fold over onto the tablet. Note: avoid covering the #1 pull tab, as you will need this free to pull off the adhesive side. The #2 tab can be covered with the masking tape. This creates a hinge that takes the guesswork out of alignment. Once you’re satisfied with the alignment, fold over the protector and clean the screen one last time. Then peel the #1 adhesive-side protective layer a few inches before folding the shield protector back onto the screen. Let the hinge do the alignment for you as you continue peeling the #1 layer back. Hope this helps.

Cheap. Not glass. Will serve against scratches and oils from touch. Not particularly spectacular and its easy to waste one or two if your install environment isn't dust free. Also these protectors are for one model only. It's not versatile at all.

The measurements exactly what I need

It's ok

Perfect fit on time and durable

The media could not be loaded.  Put this on as soon as I bought my tablet last year. Woke up to find two scratches and I was so bummed thinking that it was my screen. So I stayed up all night to look up a screen replacement... turned out the screen replacement was $150+. Suddenly, I realized that it might be just the screen protector 🤞. So I to the screen protector off... and BAM! My beautiful screen was still a virgin. If you don't want to spend $150+ than buy this! It will keep your tablet pure.

Pensaba que era una mica de cristal templado, pero creo que leí mal la descripción. Aún así el cristal óptico va de lujo y épale, trae 3 juegos con varias [varias muchas] instrucciones para instalarlo satisfactoriamente. Inclusive, un enlace de video para que no haya pierde. No dudo que va a proteger la pantalla de mi Galaxy Tab A8 2019 SM-T290, pero quizás un cristal templado hubiese ido mejor, jaja. En fin~ Una buena compra a fin de cuentas :)

Leí las opiniones que decían que se formaban burbujas y de todos modos hice la compra porque pensé, "no han sabido colocarla", pero no es así. No es la primera vez que uso un protector, y fui extra cuidadosa al adherir a la pantalla, de todos modos hubo un par de burbujas pequeñas, el problema fue al retirar la capa que protege al protector, entonces se formaron una cantidad de burbujas. No me quedó más remedio que retirarla y volver a colocar el film que, por cierto, es muuy delgado.

You’re pretty much buying one screen protector since it’s a nightmare to install. The first one came off as I removed the layer tagged as #2 and once that happens it’s impossible to get rid of bubbles and dust particles. The second one I had to adjust and since these are the exact size of the screen, it emds up on the lip even if slightly off and again once you adjust dust sneaks in. Finally, managed to install the third one but was a nightmare. All screen protectors I’ve used on my iPad or iPhone are smaller than the actual display so that you don’t catch the lip or the display and also can easlily push air bubbles toward and out of the edges.

me pareció bueno pero no trae tela húmeda para limpiar, es indispensable para un buena instalación.

Probably for scratches but it's not glass in terms of protection and usability. I've returned mine.