Fender® HiMass™ 4-String Bass Bridge Assembly With Zinc Saddles, Chrome

Good value for money

I bought this bridge for a Fender copy bass that I use as a spare. It was a straight swap and the difference in sustain and harmonics over the cheap bridge that was on it is incredible. I’m surprised at how little it costs given the quality.

I have a `76 Fender Jazz bass and the bridge was looking a little tired. If I were using the bridge and pickup cover it wouldn`t matter, but I don`t use it as it restricts where you can play the strings. This bridge is much more solid and built to be seen. The screw holes are in exactly the right place, it`s a straight swap-in. There are no screws supplied so you have to use the 5 on the bass. The only issue was that after the swap, the action was maybe 3 or 4 mm higher at the 21st fret, which is way too high. Even with all the grub screw adjustment at the lowest, the saddles are way too high. Two options are possible: you could try to put a shim in the neck joint to alter the angle of the neck, or you have to file the saddle grooves down, in my case, a lot. I bought a set of luthier`s files and used the round ones to take the saddles down, maybe 4mm off the E saddle, maybe 2mm off the G saddle. Don`t do it all at once, take some metal off, refit and try it, bit more off, try it again. It's OK to take a bit more metal off than is necessary as you can then use the grub screws to raise the saddle a bit. Setting up the intonation is by using a cross-head screwdriver to adjust the saddle position back or forwards while checking the open and 12th fret tuning are both in tune. Do this for each string. I can`t get my head round why that is in different positions for each string, but it usually is! The look of the bass is much-improved and modernised. This bridge is sturdy and designed to be seen. A worthwhile upgrade, wish I`d thought of doing it sooner. You may well need those Luthier`s files, so have another tenner ready.

Decided to replace the original bridge on my Precision Special as I found the popular stock bridge this bass came loaded with had some sharp edges. When played the bass using a pick, it often caused little cuts or irritation on the edge of my hand which put me off using this bass . The Fender HiMass was a straight in and out swap with minimal adjustment needed on both the saddles and intonation screws. Much smoother on the hand.

Easy to install. Had no problems in relation to string action as other have described I have a fender mim standadrd jazz and and you can set the strings so low that they are touching the fretboard and inaudible, I have mine set at 2mm from the 17th fret which is lower that the 'standard action' no shim required and certainly no filing or cutting. only tools needed were a philips screwdriver and a allen key

Great hi mass bridge for reasonable price fits perfectly onto fender squire bass guitars, great stuff miles better and more robust that the standard bridge

Both my Jazz and Pbass has these HiMass bridge! Great price and gave my basses the sustain it needed.easy to install.eell wort it.

Fitted one of these to my Fender short scale Mustang electric bass. It was a direct drop in replacement for the standard fit bridge and I used the existing 5 screws to mount this one. The bridge is solid, sturdy and well made. It comes with the correct Allen key to adjust saddle heights. I then spent about 45 minutes re stringing, adjusting action, and intonation. It all dialled in perfectly. The difference is quite noticeable, sustain is noticeably improved, and the annoying D string buzz from using flats I had is gone as the the strings are set better on this bridge. No work needed on the neck and no truss rod adjustment required. So for not a lot of money this has been a very positive upgrade, and let's face it...it does look the part as well with the Fender branding. And yes they are Seymour Duncan Quarter pounder pickups...

Convient parfaitement pour une Squier Sonic PB. Sans perçage, s'adapte parfaitement. J'ai juste conservé les visses d'origine. Son plus précis et sustain amélioré

うん かっこいい

Produto original de material pesado, robusta, furacão é a mesma do fender México. Não tem diferença no som nem aumentou o sustem como algumas pessoas dizem. A diferença entre a antiga e a nova é que os carrinhos não movimentam para cima e para baixo, o que me incomodava na ponte antiga que é mais simples e é o motivo da troca, e claro, esteticamente, achei que ficou lindão o Bass.

No se puede ajustar una acción baja para tus cuerdas, es extremadamente alta. En mi opinión no recomiendo comprarlo.

Great bridge and fast delivery. Perfect upgrade to my Fender PJ bass. Quick set up and the extra mass does help with some sustain and control over the bent metal bridge that was stock.