Electromagnetic Power Relay, 8-Pin 10A 12 DC Relay Coil with Socket Base, LED Indicator, DPDT 2NO 2NC - MY2NJ [Applicable for DIN Rail System]

Very satisfied with this relay. You will want a DIN rail to mount the base. I got the 12V coil, 10A DPDT model. Works great, low coil current. Built in LED is very handy. There’s also a clever way the contacts show visibly closed. The base socket is clearly labeled and the screw terminals are robust. My only suggestion to seller would be to include a short DIN rail, for convenience.

They work great! Had them now for a little over a year and still working.

I used to switch 120VAC on and off with a 12VDC driver circuit. The relay and socket work great and seem to be good quality.

It does what I expected. I don't know what else to say, it appears to be well made. But I don't know durability or sturdiness yet. Works great so far.

These work well, but if you want the LED indicator to function properly, you'll need to be aware of the coil polarity, which is typically not a concern. The provided socket/terminals are great because they allow connection to the relay without soldering, which is what caused my previous relay to fail. Relays are somewhat fragile and heat-sensitive, and this is a great solution.

Worked great , good value. Used for 24dc

We were installing some equipment and the monitoring equipment and the fire department both needed the signal to go to their monitoring stuff. So we put in a relay now both of them have a contact. It's problem solved. And because it fits on a din rail I was able to just install it in our existing equipment win-win.

Relays included bases and retaining clips as well as DIN rail. This was everything needed for installation in one kit. Otherwise it is a very standard DPDT relay. Relays functioned as expected, flags to indicate position worked as expected. LED relay position indication was less perfect, but doesn't matter to me.