Silicone Mold Making Kit Liquid Silicone Rubber 15A Platinum Silicone Translucent Mold Making Silicone for Casting Resin Molds, Silicone Molds (7 oz)

As described.

OK, so I bought this because it was the cheapest one out there that came in clear. Props, it came a whole day early than the original arrival date. There were no real directions but I read in the comments that it was a one to one ratio. I planed on using it all at once so it was not a big deal. Turned out that the mold I made was too big and I ended up not having enough, so I ordered a second set. It came a whole day early again! So I technically got both shipments within the same week. I was able to mix up and pour into the mold on top of the preexisting silicone (which had cured nicely) and it cured as one big piece.I have since used the mold almost 20 times and it is holing up well. The clearness had turned white with use in the area that was curing resin in, but that is ok. I just needed the clearness so I could cut the mold in the correct places when I was getting the original pieces out.The mold has high detail and almost no bubbles in the final product (mind you this was the first time I was making a mold so the bubbles are more likely my fault).I cannot recommend this enough and I plan to buy more (soon hopefully). I cannot say anything for the shelf life as I did not have any leftovers. However, the bottles have a nice plastic plug underneath a screw-on lid so it should do well for a while at least.

Very good mold making kit. I had no problems with using this product. It's easy to use, just follow the directions. Make sure you give it a good stir. It does not set up fast so you have plenty of time to work. I poured Part A & B just like the video showed to ensure I was getting an accurate ratio mix. FYI- I ended up placing my molds in the oven on warm (175 F) for about 15 minutes to speed up the curing time after approximately 9 hours. I would check the molds in the oven in 5-7 minutes increments just as a safety precaution. My preference, you can do as you, please, but mine came out perfect. Please see the photo of my molds. I highly recommend this product and will continue to purchase based on my needs. I have no complaints whatsoever.

There isn't a ton of silicone included with this, but if you know how much you actually need this could be fine. Just make sure you don't need a larger quantity.

Another tool in the arsenal of a tinkerer. If I can't mill a part from plastics or metal, I can often cast them and this product does what it should.

Works ok but is very small quantity.

Super easy to use and dried very nicely. I used a scale to make sure I accurately measured the two liquids and then allowed it to dry for the suggested amount of time. Worked great, and a great amount of product for my needs. No bubbles, very soft and flexible when dry.

Wonderful!!! DEFINITELY TRY IT!