FanAut 18.5 Ounce Epoxy Resin Crystal Clear for Art, Crafts, Tumblers, Casting and Jewelry Making with 2 Droppers, 2 Sticks,2 Pair Gloves and 1 Pack of Resin Glitter

I have been experimenting with several types of epoxy resins, mostly for jewelry making and small mold cubes , spheres, cones and such. I have probably used about 7 different resins sold on amazon, all of them being virtuous in the brilliance of their results. I have researched crafting videos on YouTube to help refine my selection. However, i just learned about FANAUT and am very impressed that it stands out above all the other resins I have used in that it results in a harder finish and more solid product. It also releases bubbles better than any resin I’ve used prior to it, which is a big deal as trapped bubbles can be a big issue. My specialty are rings where the resin thickness is thin and the harder the better so long as it is not brittle. I am very pleased with the results of FanAut resin for this purpose as it is a ring with a stronger, solid feel so long as it is not heated in hot water. A problem with rings is that they get soft when doing dishes with hot water. FANAUT also softens with hot water , but not to where it will fall apart, and as soon as you subject it to cold water, it returns to its solid hard density almost immediately, so in that way it is better than other resins I have worked with. The bottom line is that this is the best resin I have used for jewelry making thus far from Amazon. It is not just a little better, but it is notably better than the next best product available on Amazon that I have worked with. So I am giving it a very strong endorsement of five stars.

This was my first time doing an epoxy art project I had done my counters once before but never had I done art projects for fun so I went ahead and chose this and my project turned out awesome for my first time! I started working on it around 10 am and by midnight it was almost completely cured I let it sit awhile longer and took it out the next morning when it was completely cured and I’m obsessed with it so I went ahead and ordered more so my daughter could do a project with me she’s 12 and she helped do the heart in my images. Love love love how simple it was to use this epoxy we just used a Styrofoam cup and filled both cups up to the same level with resin and Hardner and then mix them into another cup we would then add our colors let them sit for a few minutes and it worked perfectly!

First time doing resin and this was the perfect product to do my first resin molds.Super easy directions. Equal parts of A and B, stir in one direction slowly getting the sides and bottom of cup.No bubbles whatsoever when ready to pour.I had one large bubble because I stirred it too fast, and all I did was bring the bubble to the surface and it popped.Easy pour, and self levels.Good working time. About 40 mins.Cured without stickiness, less then 24 hours.Cured clear with no bubbles.This will also depend on the humidity and temp of your home.I already made three coasters and now onto bigger molds.I do recommend this!

I was worried after reading other reviews, but tried this brand anyways for making a tumbler cup. Most products are going to have some bad reviews for one reason or another. This worked great! Just mix a 50/50 ratio, stir it slow, and let it sit 5 minutes like the directions say. That will dissipate most tiny bubbles that inevitably form. Mine cured flawlessly when I did that. Also, if you're doing a tumbler, make sure you put it on thick and leave it on the cup turner. If you put it on too thin, it will fisheye (have dry spots). It can be fixed by putting on another thick layer and letting it turn (tried it).

I recently started to explore out a bit more with my crafting abilities. I have seen a ton of videos on how to make stuff with epoxy such as tumblers and key chains and lots of other items. I wanted to give it a shot. I ordered this kit and it is very easy to follow and set up. This was my 1st time trying anything like this and I think it went well. Everything was clearly labeled and easy to use. Everything I needed down to a package of epoxy safe glitter was included. When these bottles run out I would absolutely repurchase. Next thing I am going to try is to make some dog tags. I just need to silicone mold.

First time using a resin product and I am very happy with the results. Followed the instructions exactly and my test project worked out perfectly. Dried clear and hard well within 24 hours. Not too many bubbles (which easily torched out). There WERE a few small areas of fish eye, but I am almost certain this was from the unsealed edges of the porous ceramic tile releasing air bubbles. I don't think this would have happened if I had used all non porous materials or sealed the tile, or babysat it longer. Overall very happy and excited to use it more.

I've been holding on to these few flowers since my mom passed; I had thought about making bookmarks with them but never got to it. Was browsing on here when I thought about the flowers again & decided to buy this. I'm finishing up my little Rose Sphere, my Rose Cylinder is just about done. I had a few tiny bubbles but that was my fault. I've already used over half of it & already thinking of my next project. Let's call this pre-addicted lol

I have purchased this resin multiple times but this last batch is so bad. I thought it was me my first cup with this batch but I’m on my third and it just keeps separating and creating fish eyes all over the cup! So upsetting!