12Pcs 2 x 1.5V AA Battery Holder Case Box, 2 AA Battery Holder with Wire Leads

Thes battery holder do the job. They hold the AA batteries well, no tendency for the battery to slip out by itself (I have had problems with the AA cell partially popping out of the holder and losing power with other models of battery holder). The plastic is sturdy and grips the batteries well. The springs are good - but, every once in a great while, with a new holder, you have to make sure that the AA battery slides forward all the way and makes contact with the positive side terminal (This is a side effect of how well the sides of the holder grip the AA cells). After some use they holder loosens up and this is not a problem. They have convenient screw holes if you need to screw or bolt the battery holder down. The ends of the wires come pre-tinned for easy soldering.

High quality item, well made and fits inside the old radio. But the leads were too short--they need to be 7" long. If the wires are long enough, you will love this product.

Work as advertised. Hold the batteries securely and the wires hold up well.

This is an overall great product for either replacing or adding this power delivery to your project. Depending on what you are using it for may determine if this one is right for you. PRO: 1. This product will solve this problem. Check your deminsions of the old to this product. 2. Great value for the price. Just like most things you may only need one and not 12. However, for the price you can't beat it. CONS: 1. I know this design has been around a long time but a sturdier/stable connection to the housing could improve an already great product. A little rubber shrink connecter at the exit from the case would definitely add more value to this product.

A described

Worked fine, great value.

When buying a AAA battery holder, you have one thing in mind...durability. You dont want the case to crack, the springs to pop out or the leads to be insufficiently connected. The WAYLLSHINE 6PCS 2 x 1.5V AAA Battery Spring Clip Black Plastic 2 x 1.5V AAA Battery Case Holder Box Black passed on all criteria. You could probably find them elsewhere for a buck or two less, but you probably couldn't receive them any faster. Maybe that's two criteria then - durability and delivery time. Oh, and price, too. I guess there is really three things you probably have in mind if you are considering ordering these. Maybe there's more, but I can't think of any. I recommend buying these, but only if you need a set of of AAA battery holders. Otherwise, you're just being foolish with your money.

Functions as intended but not easy to use and does not hold up well to any heat. Melts and warps easily making it near impossible to upgrade from the included thin wire leads if desired. End tabs holding outermost batteries are too large making it very difficult to remove those particular batteries.

Good product, as described !

works as expected

Good, cheap. Wish they had an on off switch so I wouldn't have to take the battery out every time...

The battery holders were delivered in a timely manner and were as advertised. They work well for the applications I use them for. I would recommend this product.

These AA battery holders are of good quality and offer good battery retention. The wiring is long enough to allow tailoring leads to fit a particular installation. These were purchased to replace battery holders in an Elecraft KX1 CW QRP transceiver. I eventually managed to complete the installation BUT these new holders are a touch wider than the original ones -- about 2 to 3 mm or so .... This required some creativity to fit in an extremely tight environment. Something to keep in mind if you replace or retrofit anything.