Motion Pro11-0089 Gold M5 x 0.8 Micro Bleeder

Got this for my Suzuki DRZ400 Supermoto. It works great.

Must need if your wanting to depressure your forks

Used to replace (red)cheap copy that was too long and Internal valve seat pushes onto the fork spring top washer when pushed in to open the valve. MotionPro mini valves cost 4x as much but are worth it. Shorter overall, better quality, and the valve seat is internal to the unit.

Easy to install easy to use. Motion Pro thank you

My bikes ate in and out of our truck it trailer several times a week. So I bleed the forks frequently. This makes it easy. I’ve heard folks say these could get knocked off in a crash. On my bikes at least that would be almost impossible as they reside under the handlebar. They’re cheap. I have an extra set in case the leak. They haven’t yet after many many hours of riding and loading and unloading cycles.

Went in easily on my 2016 WR250R. The instructions say you're supposed to rotate the fork tube until you can thread in the bleeder, but mine were in a decent spot where I didn't have to do that luckily. I just went hand tight and then a little more. I used some super lube on the threads and o-ring and everything seems to be working fine. Don't forget to take all the weight off the front tire when you bleed the forks. Bleed them often! We'll see how my fork seals hold up with this product. I bleed after every ride.

Excellent, spend a few more dollars for quarity, don't waste your Hard earned money 💰 on cheesy Chinese knock offs!!! I see guy's spend thousands on their suspension only to buy cheap Chinese bleeders, motion pro is the original and the best!

These have handled some major high speed suspension bottom outs without blowout like others have claimed they may do. So my experience with them on my 2019 YZ450FX is that they have been very durable! I'm talking an accidental nose landing from 20 ft up that hit so hard I crashed. Pretty sure that's the ultimate test BUT I'm running factory oil levels so maybe increasing oil volume might cause higher pressure spikes beyond their design spec. For stock though they've been great for 6 months or so now.

Quedo excelente para una CRF250rx 2023, buen precio y buena calidad de la marca MotionPro

Good product , a simple way to be able to bleed your forks on the trail.

Fit like a charm. Look and work good

Very tight fit on 2007 kx450f KYB forks. The brass slots stripped when installing on both. They are in, but don't look great because of slots look wrecked. When installing you need to use a lot of pressure to hold the vent button down and also the bleeder is wedged between the cap nut and rim of fork cap. I used a wide slotted driver that fit perfectly...thought it wouldn't happen on the second one after slipping on the first, but it did. They would be easier to install on flat fork caps like on my 09 kx250f or 05 kx125 although I used motion pro bleeders that are installed with a socket.