🔗 Connect with Confidence!
The Dorman 800-617 Transmission Cooler Line Quick Connector is a cost-effective, application-specific solution designed to replace original connectors on select Ford and Mercury models. With corrosion-resistant features and quality assurance from U.S. inspections, this connector ensures a secure and reliable fit for your vehicle.
S**C
2005 F250 5.4L- 5 Speed Transmission with external Trans filter
Worked fine on the Radiator. These Fittings did work with the replacement OEM Lines at the radiator on my 2005 F250 with 5.4L engine 5 Speed Transmission, FX4, 4x4, snow plow prep, XLT package with factory external transmission cooler.What was strange is that on this Truck there are 4 of these fitting on the external transmission filter housing,Right front passenger side lower engine compartment.2 fittings face the front of the truck the other 2 fittings face the rear of the truck.This item worked on the front left transmission line on the housing. But it would not work on the front right side of the filter housing. The fitting screwed in Just fine into the housing, but the new factory OEM transmission line was bottoming out inside of the fitting and would not lock in. I was able to use the original OEM fitting after fighting to free it from the line on the bench. The new OEM factory line locked right into the old factory fitting but not the Dorman fitting. I compared the new OEM line to the old OEM line and they were exactly the same. That line on the right front of the filter housing must be 1/16 of an inch too long to lock into this Doorman fitting. But like I said this doorman fitting worked fine at the radiator and at the front left side of the external transmission filter housing. I don't know if it works on the rear 2 lines on the external filter housing as I did not need to replace anything there. Got the Job done.Used 2 Dorman fittings at the Radiator and one at the left front of the filter housing. Be sure to push your transmission lines ALL the way into these fittings, You can be fooled into thinking that the line is all the way in when its not. After you install the line into the fitting. Try to pull it back out with some muscle. Of course if it doesn't pop back out your locked in.
T**M
Fit perfectly with my radiator
Excellent fit Ford Explorer 4.0 radiator 5r55s transmission
M**H
Great product nice design
I like this product it fit my transmission cooling lines but make sure the radiator is not an aftermarket will not fit aftermarket I have to return this radiator and get the OEM for threads and quick connect to match
W**M
They fit.
They fit perfectly and did not leak, so far.
T**Z
Invaluable if you live in the rust belt!
So I bought a 2005 F250 that the transmission lines were leaking badly on due to severe corrosion. I ordered some new lines and went about replacing them. Well the quick connect fittings were so rusted they wouldn't disconnect the line with the disconnect tool and I ended up destroying them. Google revealed that Ford doesn't sell just the fittings you have to buy a whole new radiator, which is total BS! So I did some more digging and found these, even though it says they won't work on the F250's the reviews and comments said otherwise so being desperate not to spend an insane amount of money on a new radiator just to get two new fittings I decided to order these and hope they fit. Well they came and I installed them and they were a perfect fit. Saved me hundreds of dollars from buying a radiator. I did read some reviews where people said the lines blew off. I'm wondering if they didn't have the Ford factor plastic retainers installed on the lines that prevent from blowing out. Anyways if that happens on mine i'll come back and update the review appropriately. For now these things rock and saved me a ton of cash!
A**O
Fixed leaky trans cooler
Replaced connectors for my leaky transmission cooler input/output. No further leaks detected.2007 Ford Edge AWD SEL
M**Y
Works perfectly!
Fixed the leaks!
A**R
Will fit 2005 F250 SD gasser
Like many folks, the rust and corrosion fused my oil cooler lines to the quick disconnects and were not able to be disconnected. This product matched up with my radiator to allow me to not have to buy a whole new radiator unit that ford wanted me to do. Save yourself the time if your trans cooler lines are corroded to the disconnects and purchase these QD's.
B**E
F550
I used this product on a 2008 Ford F550. Im sorry i made a mistake. Im not sure if it will fit an F150.
A**I
Highly recommended
Awesome product parts arrived quickly and fit just like oem! Used the fittings on my 07 f350 6.0 when I went to an allAluminum radiator. It was a smooth installHighly recommended
C**E
GOOD PRICE!
really good price and super fast delivery thank you for the service
R**N
Good replacement
Fit my 2004 F 250 diesel perfectly
C**N
Bonne piece
Bon prix et livraison rapide.
Trustpilot
1 day ago
2 weeks ago