CAMO LEVER Deck Board Bending, Straightening and Locking Tool

I used the CAMO lever deck board tool for my recent deck project and it worked perfectly. It held boards tight and straight with very little effort, making installation fast and consistent. The build quality feels solid, and it saved me a ton of time compared to doing it by hand. Highly recommend this tool to anyone who installs decking—it’s a real game changer!

This CAMO Lever Deck Board Bending, Straightening and Locking Tool works. I used two of them to install 8 foot Trex decking. I would put down 4 board at a time then used 2 of the Camo Leavers. They pushed everything up tight and holds the decking in place. Easy to use and works well and makes the install faster. I think it would work good installing decking on a trailer or a number of other things.

So I spent about 50 hours bending 2x6 redwood onto a deck replacement. Figure 130 12’ pieces of lumber cut and fit over 24” o/c joists. I used the camo hidden fastener system which also set my minimum board spacing. This lever tool works really well for bending Home Depot lumber into submission. Using can leverage off of my joists corrected most of the wood defects encountered. I paired this tool with several Dewalt clamps to suck the lumber down to the joists to minimize board height differences. Having two of these levers would be even better and would probably reduce the amount of physical effort needed to force the boards into submission. I don’t think I would have been able to get the results seen without the tool’s assistance. Not with Home Depot pretzel wood at least.

I'm putting down composite boards on my deck, and the boards are not always straight. I tried another product to try to push them together for the hidden clips between the boards, and it was so hard to do. I went back into the house and ordered this Camo. I love it! It works so easy and holds the boards well. I'm doing this project alone so the holding the boards in place is a big deal to me. My deck is approx 20 feet by 20 feet so I have a lot of decking to put down and it's making my job so much easier. I HIGHLY RECOMMEND this CAMO Lever Deck Board Tool!!!!

Makes correcting bowed boards a breeze

Works great for most situations. There were a few tight spots where the tool was too long to fit in the corner I need, but it works great and seems durable.

Purchased to build my 16 x 20 ft deck. Got a great deal on 20 ft deck boards that were less than perfect. This tool brought them in line.

If you're installing decking, this is a must have tool. It will take the warp out of decking board and help with the gap.

Very practical

I received this for a deck project over the summer break. This morning I opened up the box and it is obvious this is a used item. Not happy! Damaged packaging / rusted parts / dirty parts / opened packets…

Definitivement a avoir si vous posez une terrasse a lame.

Super outils

Very easy to use, locks in place to allow for 1 person job.